Mellerware 29800 用户手册

Please study these operating instructions before using 
the coffee maker, and keep it for future use.

Before making coffee you should use the coffee maker 
once with water only (without coffee or filter paper).
1. 

Insert the plug into the socket.

2. 

Fill the glass jug with cold water, open up the  

 

lid, and pour the water from the glass jug into  

 

the water tank, then close the lid to its original  

 

position.

3. 

Place the glass jug in its original position.

4. 

Note that the lid should be fitted securely.

5. 

Start the brewing process by pressing the on/off  

 

switch.

     

1. 

Display Function: four digit 24 hours display,  

 

real time and pre-set timing. The red LED  

 

indicates that the appliance is in the heating  

 

condition, while the  green LED indicates that  

 

the appliance is on timer standby. When the  

 

coffee maker is plugged into the wall socket,  

 

and both LED’s are off, the display will show 

 

the real time or any pre-set time.

2. 

Push Buttons

2.1 

Press Button “on/off”: The appliance will start to  

 

prepare coffee. The unit will turn off automatically  

 

after 2 hours as a safety feature, and the LCD  

 

will show the real time. Press this “on/off” button  

 

when  the green LED is on and it will cancel the  

 

pre-set time.

2.2 

“Auto” Button is the automatic on switch. 

 

To pre-set the timer you must press the “pro”  

 

button twice and start to set the required time,  

 

then press the “pro” again to switch the appliance  

 

in standby mode (with green LED on). Pressing  

 

“auto” will cancel the pre-set timer program.

2.3 

“Pro” program setting

2.3.1  Setting present time: plug in the appliance  
 

and  the system will show 12:00. Press and  

 

hold the “pro” button for 3 seconds and the  

 

word “set  time” will show on the top left of the  

 

LCD, then press “hr” to set hour and press  

 

“min” to set minute. Press and hold the pro button  

 

for 3 seconds again to exit the time setting. 

 

If you do not, the pre-set time will be exit after 10  

 

seconds. Unplugging the appliance will cancel  

 

the preset present time, and resetting the time will  

 

be required.

2.3.2  Setting of timer: press the “pro” button twice  
 

to enter the “set timer” function, the word  

 

“set timer” will show at the top right hand corner. 

 

Press “hr” button for hours setting and press  

 

“min” for minute setting. Press the “pro” button 

 

to confirm and press “auto” button to switch  

Glass Jug

Funnel Cover

Handgrip

Display

Funnel

Valve

Filter

Control Panel

Bottom Board

Water Spout

MAX

MIN

Water Tank Cover

Water Tank

Body