KitchenAid KCM1202 使用和维护

Use of the water filter is optional, but strongly recommended. The filter reduces 

contaminants which impair the coffee flavor. The Coffee Maker will operate normally 

without it. 
The water filter is for use only with municipally treated tap water or well water that  

is regularly tested for contaminants; the filter is not intended to remove contaminants  

in water that is not suitable for drinking.

Place the filter cartridge in a separate 

container filled with fresh, cool water. 

The cartridge should remain submerged 

in the water for 10 minutes. Rinse the 

filter cartridge under running water for  

5 seconds after soaking.

Lift the water tank lid using the tab on 

the rear of the lid. 

 

Place the filter cartridge in the well 

at the bottom of the water reservoir. 

Push the cartridge slightly to make sure 

it fits snugly.

IMPORTANT: Every time you install  

a new water filter, run the Coffee  

Maker through a complete brew cycle 

without coffee. Use a full carafe of  

clean, cool water. 

Wash the brew basket, Gold Tone permanent filter, and carafe in hot, soapy water,  

then rinse with clean water and dry. Do not use abrasive cleansers or scouring pads.
NOTE: These parts can also be washed in the top rack of the dishwasher.