Bunn ITCB 用户手册
Page 49
PROGRAMMING THE BREWER (cont.)
PROGRAMMING FUNCTIONS - LEVEL 2 (cont.)
DILUTE OZ/M
This function allows the operator to view or to enter the
actual fl ow rate coming out of the dilution nozzle. This
is NOT used to change the actual fl ow rate, but to tell
the internal controller how fast the water is fl owing.
This function allows the operator to view or to enter the
actual fl ow rate coming out of the dilution nozzle. This
is NOT used to change the actual fl ow rate, but to tell
the internal controller how fast the water is fl owing.
Procedure to adjust the dilution fl ow rate setting:
1. Press and hold the right hidden button until the
1. Press and hold the right hidden button until the
display reads SET LANGUAGE. Press the right hid-
den button until the display reads DILUTE OZ/M.
The number represents what the brewer thinks is
the fl ow rate out of the dilution nozzle.
den button until the display reads DILUTE OZ/M.
The number represents what the brewer thinks is
the fl ow rate out of the dilution nozzle.
2. If the actual fl ow rate of the nozzle is known but is
different than the number on the display, use the
(-) and (+) to enter the correct fl ow rate.
(-) and (+) to enter the correct fl ow rate.
3. When fi nished, press and release DONE. This saves
the new setting and advances to the next function
screen, CALIBRATE FLOW. To exit programming
and return to the MAIN SCREEN, press and release
the ON/OFF pad.
screen, CALIBRATE FLOW. To exit programming
and return to the MAIN SCREEN, press and release
the ON/OFF pad.
P2878
BREW
A
BREW
B
BREW
C
BREW
A
BREW
B
BREW
C
CALIBRATE FLOW?
NO YES
DILUTE OZ/M: XX.X
(-) DONE (+)
36748 041504