Cecilware BC302-IT 用户手册

 

19

Located inside top cabin

 

Drain The Water Tank To Just Below The Level Of The Dispense Valves. 

  Remove The Valves And Clean.  You Can Take These Valves Apart By Hand As Shown. 
  Replace The Assembly As Needed. 
  Replace The Valve Into The Tank And Refill tank. 
 

a) The 

is factory adjusted to dispense  

0.5 oz./sec. of water during the brew cycle (spray duration). 

b) The 

DOUBLE/ DILUTION DISPENSE VALVE 

is factory adjusted,  

        on both sides, to dispense 0.22 oz./sec of water during dilution cycle. 

      
       TO ADJUST WATER FLOW RATE: 
 

Locate adjustment screw  on valve (as show here). 

 

Using an Allen Key or a flat screwdriver, rotate ¼ turn at a time,  

Clockwise (CW) to decrease water flow rate or  
Counter-Clockwise (CCW) to increase water flow rate. 

 

Check water flow output after each ¼ turn.