BLOOMFIELD 8792 用户手册

下载
页码 26
NOTE:  For your protection, please note that equipment in 
this shipment was carefully inspected and packaged by 
skilled personnel before leaving the factory.   
Upon acceptance of this shipment, the transportation       
company assumes full responsibility for its safe delivery. 
IF SHIPMENT ARRIVES DAMAGED:
 
1. 
VISIBLE LOSS OR DAMAGE:    Be  certain  that  any 
 
visible  loss  or  damage  is  noted  on  the  freight  bill  
 
or express receipt, and that the note of loss or damage 
 
is signed by the delivery person. 
2. 
FILE CLAIM FOR DAMAGE IMMEDIATELY:  
  
Regardless of the extent of the damage. 
3. 
CONCEALED LOSS OR DAMAGE:  if damage is 
        unnoticed until the merchandise is unpacked, notify the           
        transportation company or carrier immediately, and file    
        “CONCEALED DAMAGE” claim with them.  This 
        must be done within fifteen (15) days from the date the  
        delivery was made to you.  Be sure to retain the 
        container for inspection. 
 
Bloomfield Industries cannot assume liability for damage or 
loss incurred in transit.  We will, however, at your request, 
supply you with the necessary documents to support your 
claim. 
WARRANTY STATEMENT 
SERVICE POLICY AND PROCEDURE GUIDE 
ADDITIONAL WARRANTY EXCLUSIONS 
SHIPPING DAMAGE CLAIMS PROCEDURE 
1.     Resetting   of  safety  thermostats,  circuit breakers,  
 
overload protectors, or fuse replacements  unless       
 
warranted conditions are the cause. 
2.  All problems due to operation at voltages other than 
 
specified on equipment nameplates; conversion to 
 
 
 
 
 
correct voltage must be the customer’s responsibility. 
3.    All problems due to electrical connections not made in 
 
accordance  with  electrical  code  requirements  and  
 
wiring diagrams supplied with the equipment. 
4.     Replacement of items subject to normal wear, to include 
 
such items as knobs and light bulbs.  Normal maintenance 
 
functions including adjustment of thermostats, microswitches, 
 
and replacement of fuses and indicating lights are not 
 covered 
under 
warranty. 
5.     All problems due to inadequate water supply, such as 
 
fluctuating, or high or low water pressure. 
6.   All  problems  due  to  mineral/calcium  deposits,  or        
 
contamination from chlorides/chlorines. De-liming is 
 
 
 
considered a preventative maintenance function and is 
 
not covered by warranty. 
All electrical equipment manufactured by BLOOMFIELD 
 
 
 
INDUSTRIES is warranted against defects in materials and 
workmanship for a period of one year from the date of original 
installation or eighteen (18) months from the date of shipment 
from our factory, whichever comes first, and is for the benefit 
of the original purchaser, except that: 
a.     airpots carry a 30 day parts warranty only. 
b. 
dispensers; i.e., tea and coffee carry a 90  days parts      
        warranty only, excludes decanters. 
 
THE FOREGOING OBLIGATION IS EXPRESSLY GIVEN IN 
LIEU OF ANY OTHER WARRANTIES, EXPRESSED OR 
IMPLIED,  INCLUDING  ANY IMPLIED WARRANTY OF  
MERCHANTABILITY OR FITNESS FOR A PARTICULAR 
PURPOSE, WHICH ARE HEREBY EXCLUDED.   
 
BLOOMFIELD  INDUSTRIES  DIVISION  /  SPECIALTY  
EQUIPMENT MANUFACTURING CORPORATION SHALL 
NOT  BE  LIABLE  FOR  INDIRECT,   INCIDENTAL  OR 
CONSEQUENTIAL DAMAGES OR LOSSES FROM ANY 
CAUSE WHATSOEVER. 
 
This warranty is void if it is determined that upon inspection by 
an Authorized Service Agency that the equipment has been 
modified, misused, misapplied, improperly installed, or 
 
 
 
 
damaged in transit or by fire, flood or act of God. 
It also does not apply if the serial nameplate has been       
removed or unauthorized service personnel perform service.  
The prices charged by Bloomfield Industries for its products 
are based upon the limitations in this warranty.  Seller’s     
obligation under this warranty is limited to the repair of defects 
without charge by a Bloomfield Industries Authorized Service 
Agency or one of its sub-agencies.  This service will be     
provided on customer’s premises for non-portable models.  
Portable models (a device with a cord and plug) must be 
taken or shipped to the closest Authorized Service Agency, 
transportation charges prepaid, for services. 
 
In addition to restrictions contained in this warranty, specific 
limitations are shown below (Additional Warranty Exclusions).  
Bloomfield Industries Authorized Service Agencies are located 
in principal cities. 
 
This warranty is valid in the United States and void elsewhere.  
Please consult your classified telephone directory or your food 
service equipment dealer; or, for information and other details 
concerning warranty, write to: 
 
Service Parts Department 
  7.   Full use, care and maintenance instructions are supplied 
 
with each machine.  Those miscellaneous adjustments 
 
noted are customer responsibility.  Proper attention will 
 
prolong the life of the machine. 
  8.  Travel  mileage is limited to  sixty (60)  miles from an   
 
authorized Service Agency or one of its sub-agencies. 
  9.   All labor shall be performed during normal working hours.  
 
Overtime premium shall be charged to the customer. 
10.   All genuine Bloomfield replacement parts are warranted 
 
for ninety (90) days from date of purchase on non-
 
warranted equipment.  Any use of non-genuine 
 
 
Bloomfield parts completely voids any warranty
11.  Installation, labor and job check-out are not considered 
 warranty. 
12.  Charges incurred by delays, waiting time or operating 
 
restrictions  that  hinder  the  service  technicians  ability  
 
to  perform services  are  not  covered  by  warranty.  
 
This  includes  institutional and correctional facilities. 
xi 
625 
 75873
  
Owner
s M
anual G
ourmet 
1000 Dual
 Airpo
t Br
ewers