Capresso Impressa J5 用户手册
25.
You can also program the output visually (chapter 11.2).
You can also re-program all buttons to different values. Re-pro-
gramming changes the outcome of the beverage permanently.
Re-programming is easy. The re-programmed values are stored
in the machine’s memory until you re-program it again.
gramming changes the outcome of the beverage permanently.
Re-programming is easy. The re-programmed values are stored
in the machine’s memory until you re-program it again.
Example: The 1-cup espresso button is set in the factory to
1.5
OZ
volume, strength STRONG and temperature
HIGH
. To
re-program the 1-cup espresso button to
2.5 OZ
,
XSTRONG
and
temperature
NORMAL
proceed as follows:
READY
1. Push and hold the Rotary Dial until the display shows
RINSE
.
2. Turn the dial clockwise until the display shows
BUTTONS
.
3. Push the rotary dial. The display flashes
SELECT BUTTON
.
4. Push the 1-cup espresso button. The display shows
WATER
(this determines the volume in your cup).
5. Push the rotary dial. The display shows
1.5 OZ
.
6. Turn the dial until the display shows
2.5 OZ
.
7. Push the rotary dial. For two seconds the display shows
OK
and then
WATER
again. You have now changed the coffee
volume from 1.5 to 2.5 oz for the 1-cup espresso button.
8. Turn the dial clockwise until the display shows
STRENGTH
.
9. Push the rotary dial. The display shows
STRONG
.
10. Turn the dial until the display shows
XSTRONG
.
11. Push the rotary dial. For two seconds the display shows
OK
and then
STRENGTH
again. You have now changed the
coffee strength from
STRONG
to
XSTRONG
for the 1-cup
espresso button.
12. Turn the dial clockwise until the display shows
TEMP
.
13. Push the rotary dial. The display shows
HIGH
.
14. Turn the dial until the display shows
NORMAL
.
15. Push the rotary dial. For two seconds the display shows
OK
and then
TEMP
. again. You have changed the temperature
from
HIGH
to
NORMAL
for the 1-cup espresso button.
16. Turn the dial clockwise until the display shows
EXIT
.
17. Push the rotary dial. The display shows
BUTTONS
.
18. Turn the dial until
EXIT
and push the dial.
READY
.
17.3 ENERGY SAVING MODE
The J5 is set to
The J5 is set to
ENERGY –
. This means the machine is always
ready to brew coffee.
You can program an energy savings mode
You can program an energy savings mode
ENERGY
✓
. The J5
will lower the stand-by temperature. In case you want to brew
coffee the machine will then heat up for approx. 30 seconds.
To change the energy setting:
coffee the machine will then heat up for approx. 30 seconds.
To change the energy setting:
Buttons
1-cup buttons:
2-cup buttons:
Hot water
Steam
Parameters
Volume:
Strength:
Temperature:
Strength:
Temperature:
Volume:
Temperature:
Temperature:
Volume:
Temperature:
Temperature:
Duration:
Options
0.5 to 8.0 oz.
MILD, NORMAL, STRONG, XSTRONG
NORMAL, HIGH
MILD, NORMAL, STRONG, XSTRONG
NORMAL, HIGH
0.5 to 8.0 oz. per cup
NORMAL, HIGH
NORMAL, HIGH
0.5 to 15 oz.
REGULAR, NORMAL, HOT
REGULAR, NORMAL, HOT
3 to 120 seconds