DeLonghi ECAM26455M 说明手册

12

displayed; 

4.  Press the 

  button to enable or disable the beep; 

5.  Press the menu/esc button to exit the menu.

cup lighting
This function enables or disables the cup lighting. The lighting 
is enabled by default.  
The lights come on each time coffee and drinks with milk are 
made and during each rinse cycle. 
To disable or re-enable this function, proceed as follows:
1.  Press the menu/esc button to enter the menu;
2.   Press the milK or cappuccino button  (fig. 8) until “Cup 

lighting” is displayed.

3.  Press the 

  button. “ Disable?” or “ Enable?”  is 

displayed; 

4.  Press  the 

  button  to  enable  or  disable  the  cup 

lighting; 

5.  Press the menu/esc button to exit the menu.

Default values (reset)
This resets all menu settings and programmed quantities back 
to the default values (with the exception of the language which 
remains as previously set). 
To reset the default values, proceed as follows:
1.  Press the menu/esc button to enter the menu;
2.   Press  the    milK  or  cappuccino  button  (fig.  8)  until 

“Default values” is displayed;

3.   Press the ;

 button

4.   The message “Confirm?” is displayed.
5.   Press the 

 button to confirm and exit. 

statistics function
This displays statistics relating to the machine.  
To display, proceed as follows:
1.   Press the menu/esc button to enter the menu;
2.   Press  the  milK  or  cappuccino  button  (fig.  8)  until 

“Statistics” is displayed;

3.  Press the 

  button;

4.  Press the milK or cappuccino button (fig. 8) to verify:
-  how many coffees have been made;
-   how many times the machine has been descaled;
-   the total number of liters of water delivered;
-   how many times the water filter has been replaced;
-   the total number of drinks made with milk.
5.  Press the menu/esc button twice to exit the menu.

selecting the coffee taste
The appliance is set by default to make coffee with a standard 
taste. 

You can also choose one of these tastes:
Extra-mild taste
Mild taste
Standard taste
Strong taste
Extra-strong taste

To  change  the  taste,  press  the 

    button  (fig.  9) 

repeatedly until the required taste is displayed. 

selecting the quantity of coffee in the cup 
The appliance is set by default to make a standard quantity of 
coffee. 
To select the quantity of coffee, press the 

 button 

(fig.  10)  until  the  message  corresponding  to  the  required 
quantity of coffee is displayed:

MY COFFEE

Programmable: 

 from  

≃0.68/20 to ≃6/180

ESPRESSO

≃1.35/40

STANDARD

≃2/60

LONG

≃3/90

EXTRA LONG 

≃4/120

customising the “my coffee” quantity 
The appliance is set by default to automatically deliver 1 fl oz./ 
30 ml of “my coffee”. 
To modify this quantity, proceed as follows:
1.  Place a cup under the coffee spouts (fig. 14).
2.  Press the 

  button (fig. 10) until “MY COFFEE” 

is displayed.    

3.  Keep the 

 button (fig. 11) pressed until the message 

“1 MY COFFEE Program quantity” is displayed and coffee 
delivery begins. Release the button.  

4.  As soon as the coffee in the cup reaches the required level, 

press the button 

 (fig. 11) again.    

The quantity of coffee in the cup has now been programmed.

adjusting the coffee mill
The coffee mill is preset in the factory to make coffee correctly 
and should not require adjusting initially. 
However, if after making the first few coffees you find that the 
coffee is too thin and not creamy enough or that delivery is too 
slow (a drop at a time), this can be corrected by adjusting the 
grinding adjustment dial (fig. 12).

The grinding adjustment dial must only be turned when the