KUHN RIKON 3100 用户手册

下载
页码 36
3100ST 006046 010507
OPERATING SAFETY PRECAUTIONS
When the mixer is in operation it has many moving parts which could cause severe injury or death to
persons coming in contact with these parts. To help avoid serious accidents, the following guidelines
should always be followed:
1. BE SURE ALL SAFETY SHIELDS are in place before operating, including driveline shields. Exposed
machinery due to missing shields can grab hands and clothing and cause severe injury or death.
Repair or replace any damaged or missing shields.
2. NEVER PUT ARMS OR FEET INSIDE unit or discharge door opening, nor climb on or in the mixer
while it is running. NEVER allow anyone to position themselves over or near the top of the mixer
while it is running. Rotating reel, augers, and sprockets can grab clothing or create pinch points which
can cause severe injury or death to the operator or bystanders. Always lock out the power so that the
mixer cannot be accidentally turned on while inspecting, servicing, repairing or cleaning mixer.
3. NEVER HAND FEED MATERIALS into mixer while it is running. Rotating reel and augers inside the
mixer may not be visible from the loading point, and may cut or grab hands, clothing or material being
loaded, causing severe injury. Always stop mixer and lock out the power before hand loading materials.
4. NEVER ATTEMPT TO RELEASE JAMMED MATERIALS OR CLEAN MATERIALS from any area of the
mixer or discharge chute without stopping mixer and locking out the power first. Moving parts
can be hidden by materials, and stopped parts can start unexpectedly, causing severe injury. Always stop
mixer and lock out the power before attempting to remove jammed material or to clean. Be aware that the
spring loaded reel arms can spring back unexpectedly, causing injury.
5. DO NOT ALLOW OPERATION of this unit by inexperienced and unqualified people.  Keep all unquali-
fied people away from mixer during operation. Operators of this unit must be alert and use good judgement
at all times. Operator should not climb on ladder or any part of the mixer when loading, mixing or
discharging material.
6. DO NOT wear loose or floppy clothing while operating this unit. Loose clothing may become entangled
in moving machinery.
7. BE SURE the inside of the mixer is clear of any obstructions and that all shields are in place before
operating. Repair or replace any damaged or missing shielding. Exposed sprockets and chains due to
missing shielding can grab hands and clothing and cause severe injury or death.
8. SHOULD A PROBLEM OCCUR during operation of mixer, always stop mixer and lock out the power
before investigating problem. If mixer power has not been locked out, the mixer may start unexpectedly,
causing severe injury or death.
9. USE CAUTION WHEN WORKING AROUND THE DISCHARGE AND HAY PAN AREA. Never reach into
discharge or hay pan area without first locking out power. Moving parts can be hidden by material, and
stopped parts can start unexpectedly, causing severe injury.
SAFETY