Anetsberger Brothers 14G 用户手册

8

1. Move the fryer to its desired location.

2. Determine whether the fryer tends to wobble

or rock when in its desired location. If it does
not, perform step 10, then proceed to the
Fryer Operating Instructions.  If it does,
perform steps 3 through 9.

WARNING

3. Determine which caster requires adjustment

and the approximate amount of change
required to level the fryer.

4. Position the rear side of the fryer on the ship-

ping carton, exposing the bottom of the fryer
with the caster mounting plates (Figure 4).

!

INSTALLATION  INSTRUCTIONS 

(Continued)

1. Flatten the shipping carton

(after unpacking the fryer and
its parts and accessories) for
surface protection during leg
installation.

2. Position the side of the fryer flat

on the carton, exposing the
fryer bottom mounting brackets
for caster installation, as shown
in Figure 4.

3. Place the caster mounting plate

flush against the mounting brac-
ket on the fryer bottom.

4. Insert one mounting bolt

through a flatwasher (sup-
plied) and the caster mounting
plate, then through the proper
hole in the fryer bottom mount-
ing bracket.

5. Screw a locking nut several turns onto the

mounting bolt.

6. Repeat steps 4 and 5 until all four mounting

bolts for a caster are in place with locking nuts.

7. Tighten the four bolts evenly and securely to

hold the caster mounting plate against the fryer
mounting bracket.

Figure 4.  Typical Caster Installation