Traulsen G31010 产品宣传页

Project

Quantity

Item #

Model Specified:

CSI Section 11400

Refrigeration System
A top mounted, self-contained, balanced refrigeration system using R-404A
refrigerant is conveniently located behind the one piece louver assembly.  It features
an easy to clean front facing condenser, thermostatic expansion valve, air-cooled,
semi-hermetic compressor, large, high humidity evaporator coil located outside the
food zone and a top mounted non-electric condensate evaporator.  A 9' cord and
plug is provided.  Standard operating temperature is 0 to -5

°

F.

Controller
The easy to use water resistant microprocessor control system is supplied standard.
It includes a 3-Digit LED Display, and a Fahrenheit or Celsius Temperature Scale
Display Capability.

Interior
Standard interior arrangements include three (3) epoxy coated wire shelves per
section, mounted on shelf pins, installed at the factory.  Shelves are full-width, and
do not have any large gaps between them requiring the use of "bridge" or "junior
shelves."  Recommended load limit per shelf should not exceed 225 lbs.

Warranties
Both a one year parts and labor warranty and a five year compressor warranty (self-
contained models only) are provided standard.  An optional 2

nd

 year extended parts

and labor warranty is also available.

Net Capacity cu. ft.

69.1 (1958 cu l)

Length Overall in.

76

5

⁄

16 

(193.8 cm)

Depth - Over Body in.

32 (81.3 cm)

Depth - W/Door Open 90

°

 in. 56

7

⁄

8 

(144.5 cm)

Depth - Overall in.

35 (88.8 cm)

Clear Door Width in.

21

1

⁄

8

 (53.6 cm)

Clear Half Door Height in.

27

1

⁄

2

 (69.9 cm)

Clear Full Door Height in.

57

5

⁄

8

 (146.3 cm)

Number of shelves

9

Shelf area sq. ft.

1

51.9 (4.82 sq m)

Height - Overall in.

83

1

⁄

4

 (211.5 cm)

Voltage

115/60/1

Feed Wires with Ground

3

Full Load Amperes

15.8

Refrigerant

R-404A

BTU/HR - HP

2

5220 (

3

⁄

4

 HP)

CARTON DIMENSIONS Domestic Crated Only

Length - Crated in.

91 (231 cm)

Depth - Crated in.

43 (109.2 cm)

Height - Crated in.

83

1

⁄

2

 (212.1 cm)

Volume - Crated cu. ft.

189 (5354 cu l)

Net Weight - Uncrated lbs.

690 (313 kg)

Gross Weight - Crated lbs.

870 (395 kg)

Plan View

Section View - All Models

Elevation View

Construction, Hardware and Insulation
Cabinet exterior front, louver assembly and doors are constructed of 20 gauge
stainless steel. Cabinet sides (including returns), interior and door liners are
constructed of anodized aluminum. The exterior cabinet top, back and bottom are
constructed of heavy gauge aluminized steel. A set of four (4) 6" high casters are
included.

Doors are equipped with a gasket protecting metal door pan, removable plug
cylinder locks and guaranteed for life cam-lift, gravity action, self-closing metal, glide
hinges with stay open feature at 120 degrees. Hinges include a concealed switch to
automatically activate the interior incandescent lighting. Guaranteed for life, work
flow door handles are mounted horizontally over recess in door which limits
protrusion from door face into aisleways.

Easily removable for cleaning, vinyl magnetic door gasket assures tight door seal.
Anti condensate heaters are located behind each door opening.

Both the cabinet and door(s) are insulated with an average of 2" thick high density,
non-CFC, foamed in place polyurethane.

NOTE: Figures in parentheses reflect metric equivalents.
1=

Figure shown reflects the area of standard shelf compliment plus
the additional storage area available on the cabinet bottom.

2=

Based on a 90 degree F ambient and -10 degree F evaporator.
For remote data please refer to spec sheet 13-2.

In order to assure optimum performance, the condensing unit MUST have an adequate supply of
air for cooling purposes.  Therefore, the operating location must either have a minimum of 12”
clearance overhead of the condensing unit or allow for unrestricted air flow at the back of the unit.
Clearance of at least 12” above is required in order to perform certain maintenance tasks.