Traulsen RCV232WUT-FHS 产品宣传页

Project

Quantity

Item #

Model Specified:

CSI Section 11400

Construction, Hardware and Insulation
Cabinet exterior, including front, one piece sides, louver assembly and doors are
constructed of heavy gauge stainless steel. Cabinet interior and door liners are
constructed of stainless steel (anodized aluminum in the A-Series). Exterior cabinet
top, back and bottom are constructed of heavy gauge aluminized steel.  Adjustable
6" high stainless steel legs are included.
Doors are equipped with removable plug cylinder locks and guaranteed for life
cam-lift, gravity action, self-closing metal, glide hinges with stay open feature at 120
degrees. Hinges include a switch to automatically activate the interior incandescent
lighting. Guaranteed for life, work flow door handle is mounted horizontally over
recess in door which limits protrusion from door face into aisleways.
Easily removable for cleaning, vinyl magnetic door gasket assures tight door seal.
Anti condensate heaters are located behind each door opening.
Cabinet and door contains high density, non-CFC, foamed in place polyurethane
insulation.

Refrigeration System
A top mounted, self-contained, balanced refrigeration system using R-404A refriger-
ant is conveniently located behind the one piece louver assembly. It features a ple-
num effect blower coil, large, high humidity evaporator coil located outside the food
zone, top mounted non-electric condensate evaporator, and an automatic
preset time activated electric defrost.  A face mounted key switch is provided to
convert operation from freezer to refrigerator mode.  Standard operating tempera-
ture in freezer mode is 0 to -5°F.  Operating temperature in refrigerator mode is 34 to

38°F.  Operating temperatures are not adjustable.
Controller
The water resistant digital microprocessor control is provided.  It includes an 3-digit
LED temperature display in addition to features such as a defrost lock-outs and
indicator light.
Interior
Standard interior arrangements include three (3) chrome plated wire shelves per
section, mounted on shelf pins. Shelves are full-width, and do not have any large
gaps between them requiring the use of "bridge" or "junior shelves."  Recommended
load limit per shelf should not exceed 225 lbs. Optional tray slides may be
purchased in combination with, or in lieu of these.  Both standard and optional
interior arrangements are completely installed at the factory.
Warranties
Both a one year parts and labor warranty and a five year compressor warranty (self-
contained models only) are provided standard.  An optional 2

nd

 year extended parts

and labor warranty is also available. In addition the microprocessor control is
warranted by a two year parts and labor warranty.

NOTE: Figures in parentheses reflect metric equivalents.
1=Wattage is determined by listed amps X listed volts X an average run time of 70%
for refrigerators and 80% for freezers.
2=Based on a 90 degree F ambient and -10 degree F evaporator.
3=For approximate remote weights deduct 40 lbs. from respective net or gross weight.
For other information on remote models, please refer to spec sheet 12-2.

Net capacity cu. ft.

24.2 (686 cu l)

51.6 (1462 cu l)

Length - overall in.

29

7

⁄

8

 (75.9 cm)

58 (147.3 cm)

Depth - overall in.

35 (88.8 cm)

35 (88.8 cm)

Depth - over body in.

32 (81.3 cm)

32 (81.3 cm)

Depth - with door open

57

11

⁄

16

 (146.5 cm) 57

11

⁄

16

(146.5 cm)

90 degrees in.
Clear door width in.

21

1

⁄

8

 (53.6 cm)

21

1

⁄

8

 (53.6 cm)

Clear half-door height in.

27

1

⁄

2

 (69.9 cm)

27

1

⁄

2

 (69.9 cm)

Clear full-door height in.

57

5

⁄

8

 (146.3 cm)

57

5

⁄

8

 (146.3 cm)

Height - overall on 6" legs

83

1

⁄

4

 (211.5 cm)

83

1

⁄

4

 (211.5 cm)

Shelf area sq. ft.

18.8 (1.75 sq m) 37.6 (3.49 sq m)

RCV Net Wt. lbs.

415 (188 kg)

705 (320 kg)

ACV Net Wt. lbs.

365 (166 kg)

625 (283 kg)

ELECTRICAL DATA
Voltage

115/60/1

115/60/1

Feed wires with Ground

3

3

Full load amperes

11.5

14.9

Wattage

1

1058

1371

REFRIGERATION DATA
Refrigerant

R-404A

R-404A

BTU/HR H.P.

2

2160 (

1

⁄

2

 HP)

3790 (

3

⁄

4

 HP)

Plan - R/ACV132WUT

Elevation -

R/ACV132WUT

Section - All Models

Plan - R/ACV232WUT

Elevation -

R/ACV232WUT

In order to assure optimum performance, the condensing unit MUST have an adequate supply of
air for cooling purposes.  Therefore, the operating location must either have a minimum of 12”
clearance overhead of the condensing unit or allow for unrestricted air flow at the back of the unit.
Clearance of at least 12” above is required in order to perform certain maintenance tasks.