Traulsen RSL232NUT-FHS 用户手册

Project

Quantity

Item #

Model Specified:

CSI Section 11400

Construction, Hardware and Insulation
Cabinet exterior front, one piece sides, louver assembly and doors are constructed
of 20 gauge stainless steel with #4 finish. Cabinet interior and door liners are
constructed of stainless steel. The exterior cabinet top, back and bottom are
constructed of heavy gauge aluminized steel. A set of four (4) adjustable 6"  high
stainless steel legs are included.

Doors are equipped with a gasket protecting metal door pan, removable plug
cylinder locks and guaranteed for life cam-lift, gravity action, self-closing metal, glide
hinges with stay open feature at 120 degrees. Hinges include a concealed switch to
automatically activate the interior incandescent lighting. Guaranteed for life, work
flow door handles are mounted horizontally over recess in door which limits
protrusion from door face into aisleways.  Doors have seamless, polished metal
corners.

Easily removable for cleaning, vinyl magnetic door gasket assures tight door seal.
Anti condensate heaters are located behind each door opening.

Both the cabinet and door(s) are insulated with an average of 2" thick high density,
non-CFC, foamed in place polyurethane.

Refrigeration System
The fast-freezer includes an auxiliary fan for increased air circulation and a boost in
refrigeration so the cabinet can operate in the -10 to -20 degree F range. Increased
refrigeration is accomplished by the use of a 1 HP in lieu of a 3/4 HP compressor on
a two section narrow model. On a 3-section narrow door model, we supply (2) 3/4 HP
compressors in lieu of a (1) 1 HP compressor.

These freezer models contain mullion coolers with an auxiliary fan for increased air
flow throughout the interior of the cabinet. This affords maximum heat
transfer between the air and product, resulting in faster freezing.

Controller
The easy to use water resistant  INTELA-TRAUL

®

 microprocessor control system is

supplied standard. Unit is NAFEM Data Protocol communication (NDP) ready.
Optional hardware required to be NDP compliant.  Third party software required for
network connection.  It includes a 3-Digit LED Display, Fahrenheit or Celsius
Temperature Scale Display Capability, Defrost Lockout Feature and an RS485 data
port.  In addition it includes audio/visual alarms for: Hi/Lo Cabinet Temperature, Door
Open, Clean Condenser, Evaporator Coil and Discharge Line Sensor Failures, and
Power Supply Interruption.

Interior
Standard interior arrangements include three (3) chrome plated wire shelves per
section, mounted on shelf pins. Shelves are full-width, and do not have any large
gaps between them requiring the use of "bridge" or "junior shelves."  Recommended
load limit per shelf should not exceed 225 lbs. Optional tray slides may be
purchased in combination with, or in lieu of these.  Both standard and optional
interior arrangements are completely installed at the factory.

Warranties
Both a one year parts and labor warranty and a five year compressor warranty (self-
contained models only) are provided standard.  An optional 2

nd

 year extended parts

and labor warranty is also available. In addition the INTELA-TRAUL

®

  control is

warranted by a two year parts and labor warranty.

Net capacity cu. ft.

46.0 (1303 cu l)

69.5 (1969 cu l)

Length - overall in.

52

1

⁄

8

 (132.4 cm)

76

5

⁄

16

 (193.8 cm)

Depth - overall in.

35 (88.8 cm)

35 (88.8 cm)

Depth - over body in.

32 (81.3 cm)

32 (81.3 cm)

Depth - with door open

55

3

⁄

4

 (141.6 cm)

55

3

⁄

4

 (141.6 cm)

90 degrees in.

Clear door width in.

21

1

⁄

8

 (53.6 cm)

21

1

⁄

8

 (53.6 cm)

Clear half-door height in.

27

1

⁄

2

 (69.9 cm)

27

1

⁄

2

 (69.9 cm)

Clear full-door height in.

57

5

⁄

8

 (146.3 cm)

57

5

⁄

8

 (146.3 cm)

Height - overall on 6" legs

83

1

⁄

4

 (211.5 cm)

83

1

⁄

4

 (211.5 cm)

Shelf area sq. ft.

34.6 (3.21 cu m)

51.9 (4.82 cu m)

Net Wt. lbs.

700 (318 kg)

995 (451 kg)

Voltage

208-230/115/60/1

208-230/115/60/1

Feed wires with Ground

4

4

Full load amperes

10.2

18.4

Refrigerant

R-404A

R-404A

BTU/HR H.P.

1

4130 (1 HP)

2 x 5560 (

3

⁄

4

 HP)

Full load amps and plug style may vary depending on electrical options

chosen and condensing unit employed.

NOTE: Figures in parentheses reflect metric equivalents.
1=Based on a 90 degree F ambient and -20 degree F evaporator.
2=For approximate remote weights deduct 40 lbs. from respective net or gross weight.
For other information on remote models, please refer to spec sheet 12-2.

In order to assure optimum performance, the condensing unit MUST have an adequate supply of
air for cooling purposes.  Therefore, the operating location must either have a minimum of 12”
clearance overhead of the condensing unit or allow for unrestricted air flow at the back of the unit.
Clearance of at least 12” above is required in order to perform certain maintenance tasks.