Electrolux 318 205 111 用户手册

• Electronic control has detected a fault condition. Push CANCEL pad to clear the

display and stop the display from beeping. Reprogram the oven. If a fault reoccurs,
record the fault number, push the CANCEL pad and contact an authorized servicer.

• Place oven rack in center of oven. Place a level on the oven rack. Contact installing

agent if rack and cabinet cutout flooring are not level.

• Kitchen cabinet misalignment may make oven appear to be not level. Be sure

cabinets are square and level. Contact cabinet maker to correct problem.

• When the oven is first plugged in, or when the power supply to the oven has been

interrupted, the display will flash. The oven cannot be programmed until the clock is
set.

• Be sure electrical cord is securely connected into the electrical junction box.

• Cord/plug is not installed and/or connected. Cord is not supplied with oven. Contact

your dealer, installing agent or authorized servicer.

• Service wiring not complete. Contact your dealer, installing agent or authorized

servicer.

• Power outage. Check house lights to be sure. Call your local electric company.

• Short in cord/plug. Replace cord/plug.

• Controls are not set properly. See instructions to set the controls.

• House fuse has blown or circuit breaker has tripped immediately following

installation.

• House fuse may not be fully engaged. Check fuse and screw or engage circuit

breaker securely.

• Burned-out or loose bulb. Follow the instructions under Oven Light to replace or

tighten the bulb.

IMPOR

IMPOR

IMPOR

IMPOR

IMPORT

T

T

T

TANT

ANT

ANT

ANT

ANT