Alto-Shaam 610ESG 用户手册

COMBITOUCH

TM

 ESG SERIES • GAS INSTALLATION MANUAL • 3.

The following codes and standards are required for 
installation of this oven:  
AIR SUPPLY, ELECTRICAL CONNECTIONS, 
WATER CONNECTIONS, AND WASTE WATER 
DISCHARGE.

Installation must comply with local codes required 
for gas appliances. In the absence of local codes, 
installation must comply with the National Fuel 
Gas Code, ANSI Z223.1 (latest edition). In Canada, 
the appropriate code is the Natural Gas Installation 
Code, CAN/CGA-B149.1 or the Propane Installation 
Code, CAN/CGA-B. Adherence to code by a 
qualified installer is essential for the following: Gas 
Plumbing, Gas Appliance Installation, Commercial 
Cooking Ventilation, Water and Plumbing, and 
OSHA Regulations.

A steam ventilation hood is mandatory for the 
operation of the oven. The ventilation hood must 
be installed in accordance with local building codes 
for the steam exhaust and must protrude 12-inches 
to 20-inches (300 to 500mm) over the front side 
of the oven. A grease filter must be located in the 
protruding area of the hood. Grease filters should 
be thoroughly cleaned on a regular basis following 
manufacturer’s instruction. Ventilation hoods must 
ensure an adequate amount of incoming air during 
operation and must be operated whenever the 
combination oven/steamer is used in order to avoid 
the accumulation of condensation in the hood area. 

   Note dimensions required for doorways 

and aisles for access of the oven and pallet 
to the installation site. Transport the oven 
in an upright and level position only. Do 
not tilt the oven.

®