Cisco 802.11g Integrated Auto AP, Int Antennas, ETSI Cnfg AIR-AP1131G-E-K9 数据表
产品代码
AIR-AP1131G-E-K9
Data Sheet
All contents are Copyright © 1992–2007 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Page 5 of 6
Item
Specification
Security
Authentication
Security Standards
●
WPA
●
WPA2 (802.11i)
●
Cisco Temporal Key Integrity Protocol (TKIP)
●
Cisco Message Integrity Check (MIC)
●
IEEE 802.11 Wired Equivalent Privacy (WEP) keys of 40 and 128 bits
802.1X EAP types:
●
EAP Flexible Authentication via Secure Tunneling (EAP FAST)
●
Protected EAP Generic Token Card (PEAP GTC)
●
PEAP Microsoft Challenge Authentication Protocol Version 2 (PEAP MSCHAP)
●
EAP Transport Layer Security (EAP TLS)
●
EAP Tunneled TLS (EAP TTLS)
●
EAP Subscriber Identity Module (EAP SIM)
●
Cisco LEAP
Encryption
●
Advanced Encryption Standard Counter Mode with Cipher Block Chaining Message
Authentication Code Protocol (AES CCMP) encryption (WPA2)
●
TKIP (WPA)
●
Cisco TKIP
●
WPA TKIP
●
IEEE 802.11 WEP keys of 40 and 128 bits
Status LEDs
External:
●
Status LED indicates operating state, association status, error or warning condition, boot
sequence, and maintenance status
Internal:
●
Ethernet LED indicates status of activity over the Ethernet
●
Radio LED indicates status of activity over the radios
Dimensions (H x W x D)
7.5 x 7.5 x 1.3 in. (19.1 x 19.1 x 3.3 cm)
Weight
1.5 lb (0.67 kg)
Environmental
●
32–104°F (0–40°C)
●
10–90% humidity (noncondensing)
System memory
●
32 MB RAM
●
16 MB flash memory
Input power
requirements
requirements
●
100–240 VAC; 50–60 Hz (power supply)
●
36–57 VDC (device)
Power draw
9.91W maximum
Warranty
90 days
Wi-Fi certification
System Requirements
Table 3 lists the system requirements for Cisco Aironet 1130G Access Points.
Table 3.
System Requirements for Cisco Aironet 1130G Access Points
Access Using
Description
Browser
Using the Web browser management GUI, requires a computer running Internet Explorer Version
6.0 or newer, or Netscape Navigator Version 7.0 or newer
6.0 or newer, or Netscape Navigator Version 7.0 or newer
Power over Ethernet
(PoE)
(PoE)
Power sourcing equipment (PSE) compliant with Cisco Inline Power or IEEE 802.3af, and
providing at least 12.2W at 48 VDC
providing at least 12.2W at 48 VDC