Ricoh IS 2075 用户手册
Placing Originals
11
1
BBBB
Select the original orientation (
or
) and press the [OK]
key.
Placing Originals on the
Exposure Glass
Exposure Glass
Reference
Related Initial Setting
Related Initial Setting
AAAA
Lift the exposure glass cover or
the document feeder.
the document feeder.
Important
❒ Do not open the exposure glass
cover or the document feeder
forcefully. Otherwise, the cover
of the document feeder might
open or be damaged.
forcefully. Otherwise, the cover
of the document feeder might
open or be damaged.
Note
❒ Be sure to open the exposure
glass cover or the document
feeder by more than 30
feeder by more than 30
°. Other-
wise, the size of the original
might not be detected correctly.
might not be detected correctly.
BBBB
Place the original face down on
the exposure glass. The original
should be aligned to the rear left
corner.
the exposure glass. The original
should be aligned to the rear left
corner.
1. Reference mark
2. Left scale
2. Left scale
Note
❒ Start with the first page to be
copied.
CCCC
Lower the exposure glass cover or
the document feeder.
the document feeder.
Placing Originals in the
Document Feeder
Document Feeder
Settings should be made in the fol-
lowing situations:
lowing situations:
❖
❖
❖
❖ When placing originals one by one:
❖
❖
❖
❖ When placing originals consisting of
more than 100 pages:
❖
❖
❖
❖ When copying originals of various
sizes:
❖
❖
❖
❖ When placing custom size originals:
Note
❒ Do not stack originals beyond the
limit mark on the side fence of the
document feeder.
document feeder.
❒ The last page should be on the bot-
tom.
❒ When you copy 2–sided originals,
both front and back sides of each
original are scanned at once.
original are scanned at once.
❒ Do not place any foreign objects on
the sensors or cover them with
your hands. This could cause the
size not to be detected properly or
a malfunction.
your hands. This could cause the
size not to be detected properly or
a malfunction.