Ricoh IS 2075 用户手册
Troubleshooting
86
4
If You Cannot Make Clear Copies
Problem
Cause
Action
Copies appear dirty.
The image density is too
dark.
dark.
Auto Image Density is not
selected.
selected.
The reverse side of an orig-
inal image is copied.
inal image is copied.
The image density is too
dark.
dark.
Auto Image Density is not
selected.
selected.
A shadow appears on cop-
ies if you use pasted origi-
nals.
ies if you use pasted origi-
nals.
The image density is too
dark.
dark.
Change the direction of the original.
Put mending tape on the pasted
part.
part.
The same copy area is dirty
whenever making copies.
whenever making copies.
The exposure glass or doc-
ument feeder is dirty.
ument feeder is dirty.
Clean them.
⇒ “Maintainging Your
Machine” in the General Settings
Guide
Guide
Copies are too light.
The image density is too
light.
light.
The paper size is not ap-
propriate.
propriate.
Use the recommended paper.
⇒
General Settings Guide
Note
❒ A light copy may result when
you use damp or rough grain pa-
per.
per.
Toner cartridge is almost
empty.
empty.
Add toner.
⇒ “
D
Adding Toner” in
the General Settings Guide
Parts of the image are not
copied.
copied.
The original is not set cor-
rectly.
rectly.
Set originals correctly.
An improper paper size is
selected.
selected.
Select the proper paper size.
Copies are blank.
The original is not set cor-
rectly.
rectly.
When using the exposure glass, face
the originals down. When using the
document feeder, face them up.
the originals down. When using the
document feeder, face them up.
A moiré pattern is pro-
duced on copies.
duced on copies.
Your original has a dot pat-
tern image or many lines.
tern image or many lines.
Place the original on the exposure
glass at a slight angle.
glass at a slight angle.
;;
;;;
;;;;
;;;
;
yy
yyy
yyyy
yyy
y
R