ZyXEL Communications Vantage Access 用户手册
Chapter 15 WAN Device
Vantage Access User’s Guide
186
The following table describes the labels in this screen. Refer to
for
other field descriptions.
15.13 WAN IP Connection
You can view the IP settings for the WAN connection in the WANIPConnection screen. Refer
to
to
1 Select a registered device in the Device List window and click InternetGatewayDevice
> WANDevice.
2 Click a number and WANConnectionDevice.
3 Click a number and WANIPConnection to display the screen as shown.
3 Click a number and WANIPConnection to display the screen as shown.
Figure 121 TR-069: WAN Device: WANIPConnection
Table 58 TR-069: WAN Device: WANPOTSLinkConfig
PARAMETER NAME
VALUE
Enable
This field displays 1 to indicate that the POTS link is active; otherwise it
displays 0.
displays 0.
LinkStatus
This field displays the link status (Up, Down, Dialing, Connecting or
Unavailable).
Unavailable).
ISPPhoneNumber
This field displays the phone number (up to 64 digits in countrycode-
areacode-phone number format) to dial to connect to the ISP. For example,
+86-10-62618501.
Multiple phone numbers are separated with a semicolon (:).
areacode-phone number format) to dial to connect to the ISP. For example,
+86-10-62618501.
Multiple phone numbers are separated with a semicolon (:).
ISPInfo
This field displays a descriptive name (up to 64 characters) to identify this
ISP.
ISP.
LinkType
The default link type is PPP_Dialup.
NumberOfRetries
This field displays the number of times (between 0 and 4294967295) the
CPE device is to re-dial for Internet connection.
CPE device is to re-dial for Internet connection.
DelayBetweenRetries
This field displays the time (in milliseconds) the CPE device is to wait
before attempting to connect to the ISP again.
before attempting to connect to the ISP again.
Fclass
This field indicates the transmission functions the CPE device is capable of.
0:data
1, 2, 2.0: fax
8: voice
80: DSVD
0:data
1, 2, 2.0: fax
8: voice
80: DSVD
DataModulationSupporte
d
d
This field displays the modulation method(s) supported for data transfer.
DataProtocol
This field displays the protocol(s) supported for data transfer.
DataCompression
This field displays the compression method used for data transfer.
PlusVTRCommandSupp
orted
orted
This field indicates whether full-duplex mode is activated on the link or not.