Kompernass KH3462-02/08-V1 用户手册

- 4 -

• The assembled meat grinder 

is connected

to the motor block 

by a bayonet connector:

- Insert the meat grinder casing 

into the motor

block 

, such that the arrow on the feeding

shaft lies against the symbol 

on the motor

block 

. The locking button presses itself in

(Fig. 

).

- Lightly press the meat grinder casing 

in and

at the same time turn the feeding shaft on the
meat grinder casing 

into the middle position

(Fig. 

), so that the arrow on the feeding shaft

lies against the symbol 

. When the meat

grinder casing 

engages, the locking button

springs out. 

- Finally place the feed tray 

on top of the 

feeding funnel.

- To dismantle it, press the locking button and

turn the feeding funnel to the right (Fig. 

) . 

You can now pull the meat grinder casing 

out.

b) Assembling the sausage attachment

Unfold the fold-out side. There you will find the 
step-by-step illustrations for assembling the appliance.
• Remove the meat grinder casing 

as described

under a).

• Disassemble any attachments that might be fitted

and clean the meat grinder casing 

.

Note:

The cross blade 

with the spring 

is not requi-

red for the sausage attachment 

! If need be, re-

move them both from the meat grinder casing 

.

• Coat all metal parts with cooking oil.
• Take the sausage disc 

from the small com-

partment on the top of the appliance (Fig. 

).

• Position the sausage disc 

so that the indenta-

tions in the sausage disc 

lie on the fixing 

points in the meat grinder casing 

.

• Then place the sausage attachment 

before

the sausage disc 

.

• Screw the ring clamp 

on hand-tight.

• Assemble the meat grinder casing 

as described

under a).

c) Assembling the kubbe attachment

Unfold the fold-out side. There you will find the 
step-by-step illustrations for assembling the appliance.
• Disassemble the meat grinder casing 

as de-

scribed under a).

• Disassemble any attachments that might be fitted

and clean the meat grinder casing 

.

Note:

The cross blade 

with the spring 

is not requi-

red for the Kubbe attachment 

! If need be, remo-

ve them both from the meat grinder casing 

.

• Coat all metal parts with cooking oil.
• Insert both plastic parts of the Kubbe attachment

so that the indentations on the Kubbe attach-

ment 

lie on the fixing points in the meat grin-

der casing 

.

• When everything has been correctly assembled,

screw the ring clamp 

on until it is handtight.  

• Assemble the meat grinder casing 

as described

under a).

d) Assembling the biscuit pastry 

attachments

Unfold the fold-out side. There you will find the 
step-by-step illustrations for assembling the appliance.
• Remove the meat grinder casing 

as described

under a).

• Disassemble any attachments that might be fitted

and clean the meat grinder casing 

.

Note:

The cross blade 

with the spring 

is not requi-

red for the biscuit attachment 

! If need be, remo-

ve them both from the meat grinder casing 

.

• Coat all metal parts with cooking oil.
• Remove the pattern strips 

from the front of the

biscuit attachment 

.

IB_KH3462_E3341_LB3  04.03.2008  15:47 Uhr  Seite 4