Husqvarna EZ5226 / 965921601 用户手册

MAINTENANCE

42

-Husqvarna

Replace the line-mounted fuel filter every 100 hours 

(once per season) or more regularly if it is clogged.

Replace the filter as follows:

1. 

Move the hose clamps away from the filter. Use 

2. 

flat-nosed pliers.
Pull the filter loose from the hose ends.

3. 

Push the new filter into the hose ends. Position the 

4. 

filter with the “FLOW” arrow pointing up toward the 

fuel pump. If necessary, a soap solution can be 

applied to the filter ends to ease mounting.
Move the hose clamps back toward the filter.

5. 

8011-468

Fuel Pump Air Filter
Regularly check that the fuel pump’s air filter is free 

from dirt. 
Remove the screws and open the pump, no hoses 

need be removed.
The filter can be cleaned with a brush if necessary.
Replace the filter on the console.

8009-147

8009-181

Tap the paper filter against a fixed surface to 

4. 

remove dust. If the paper filter is still dirty, it 

must be replaced.

To refit filter:

Check that the seal on the bottom of the paper 

1. 

filter is whole.
Mount the paper filter in the air filter housing 

2. 

and tighten the wing nuts.
Refit the pre-filter on the paper filter.

3. 

Replace the cowling over the air filter housing. 

4. 

Do not over tighten the plastic fastener.