Zephyr ZGE-E30AS 用户手册

Periodically clean with hot soapy water and clean cotton cloth. Do not use corrosive or abrasive detergent 
steel wool or scouring pads which will scratch and damage surface.

For heavier soil use liquid degreaser.

After cleaning it is recommended that you use non-abrasive stainless steel polish/cleaners to polish and buff 
out the stainless luster and grain. Always scrub lightly with clean cotton cloth and with the grain.

Do not use any product containing chlorine bleach. Do not use “orange” cleaners.

The mesh fi lter installed by the factory is intended to fi lter out residue and grease from cooking.  It need not 
be replaced on a regular basis but is required to be kept clean.

Filter should be cleaned after every 30 hours of use or once a month.

Remove and clean by hand or in dishwasher on low heat.  Spray degreasing detergent and leave to soak if 
heavily soiled.

Dry fi lter and re-install before using hood.

Should fi lter wear out due to age and 
prolonged use, replace with the following part 
number:

All ZGE Models     50200036          1

Replace any damaged fi lter that has punctured 
or broken mesh or damaged frame.

To remove decorative mesh fi lter:

1.  Pull  down  on  handle.                                                                       
2. Tilt fi lter down and remove from hood.

2

1