Xerox 50 用户手册
TOOLS MODE
3–26
DOCUMENT CENTRE CS 50 SYSTEM ADMINISTRATION GUIDE
1
2
3
4
5
6
7
Machine Set-up
Use these settings to limit the number of copy
sets, disable/enable the Power Saver mode
option, select desired display units, and enter
network information.
sets, disable/enable the Power Saver mode
option, select desired display units, and enter
network information.
1
On the Tools screen, touch the Machine Set-up
button to display the Machine Set-up screen, as
illustrated in Figure 38.
button to display the Machine Set-up screen, as
illustrated in Figure 38.
2
Review the current settings for each item. To
change a setting, use the up and down arrows to
highlight the desired item and touch the Change
Settings button to display the detail screen.
change a setting, use the up and down arrows to
highlight the desired item and touch the Change
Settings button to display the detail screen.
3
Perform one of the following:
•
On the Copy Quantity Limit screen (Figure
39), use the numeric keypad to enter the
maximum number (1—999) of copies/sets
allowed.
39), use the numeric keypad to enter the
maximum number (1—999) of copies/sets
allowed.
•
On the Power Saver Default screen (Figure
40), touch either the Enabled or Disabled
button.
40), touch either the Enabled or Disabled
button.
NOTE: If the Power Saver Default option is
disabled, the Power Save Timeout in Machine
Timouts will not be selectable.
disabled, the Power Save Timeout in Machine
Timouts will not be selectable.
Figure 38: Machine Setup screen
Figure 39: Copy Quantity Limit screen
Figure 40: Power Saver Default screen