Schumacher SEM-1562A 用户手册

• 2 •

To reduce the risk of damage to the electric plug or cord, pull by 

the plug rather than the cord when disconnecting the charger.

An extension cord should not be used unless absolutely necessary. 

Use of an improper extension cord could result in a risk of fire and 

electric shock. If an extension cord must be used, make sure:

That the pins on the plug of the extension cord are the same 

• 

number, size and shape as those of the plug on the charger.

That the extension cord is properly wired and in good 

• 

electrical condition.

That the wire size is large enough for the AC ampere rating of 

• 

the charger as specified in section 8.

To reduce the risk of electric shock, unplug the charger from the 

outlet before attempting any maintenance or cleaning. Simply 

turning off the controls will not reduce this risk.

Do not operate the charger with a damaged cord or plug; have 

the cord or plug replaced immediately by a qualified service 

person. (Call customer service at: 1-800-621-5485.)

Do not operate the charger if it has received a sharp blow, been 

dropped or otherwise damaged in any way; take it to a qualified 

service person. (Call customer service at: 1-800-621-5485.)

Do not disassemble the charger; take it to a qualified service 

person when service or repair is required. Incorrect reassembly 

may result in a risk of fire or electric shock. (Call customer 

service at: 1-800-621-5485.)

WORKING IN THE VICINITY OF A LEAD-ACID 

BATTERY IS DANGEROUS. BATTERIES GENERATE 

EXPLOSIVE GASES DURING NORMAL BATTERY 

OPERATION. FOR THIS REASON, IT IS OF UTMOST  

IMPORTANCE THAT YOU FOLLOW THE INSTRUCTIONS 

EACH TIME YOU USE THE CHARGER.

To reduce the risk of a battery explosion, follow these 

instructions and those published by the battery manufacturer 

and the manufacturer of any equipment you intend to use in the 

vicinity of the battery. Review the cautionary markings on these 

products and on the engine.