National Instruments PXITM 用户手册
Chapter 4
PCMCIA Serial Hardware Installation, Verification, and Configuration
© National Instruments Corporation
4-17
Install the PCMCIA Serial Hardware
Complete the following steps to install the PCMCIA-232 or PCMCIA-485
in your computer:
in your computer:
1.
Shut down the computer.
2.
Insert the card into a free PC Card (PCMCIA) socket the same way you
insert a disk into a floppy drive. The card has no jumpers or switches
to set.
insert a disk into a floppy drive. The card has no jumpers or switches
to set.
3.
Power on the computer and start Windows NT.
Figure 4-9 shows how to insert a PCMCIA serial card and how to connect
the cable.
the cable.
Figure 4-9. Inserting a PCMCIA Serial Card
Proceed to the next section,
1
PCMCIA Socket
2
PCMCIA Serial Cable
1
2