National Instruments 321372C-01 用户手册
Chapter 2
Installation and Configuration
Getting Started with CAN for Windows NT
2-8
©
National Instruments Corporation
Figure 2-7. NI-CAN Settings for the PCI-CAN/2
Each port of the CAN hardware interface is configured from this tab. Use
the drop-down box nearest the top of the tab to select the physical port
number to configure. For each port, use the Name drop-down box to select
the name for the CAN Network Interface Object (
the drop-down box nearest the top of the tab to select the physical port
number to configure. For each port, use the Name drop-down box to select
the name for the CAN Network Interface Object (
CAN0
,
CAN1
, and so on).
You use this name to refer to the physical port from within your NI-CAN
application.
application.
To access online help for the NI-CAN Configuration utility, click on the
Help button. Alternately, you can right-click on a specific control and
select What’s This? from the pop-up menu to see context-sensitive help
for the item you have clicked on.
Help button. Alternately, you can right-click on a specific control and
select What’s This? from the pop-up menu to see context-sensitive help
for the item you have clicked on.
Note
If you changed the resources for any PCMCIA-CAN or PCMCIA-CAN/2
interface, you must restart Windows NT for the changes to take effect.
interface, you must restart Windows NT for the changes to take effect.