Husqvarna 345e EPA III 用户手册

English

 –

 33

Check that the right hand guard is not damaged and that 
there are no visible defects, such as cracks.

Push the trigger up and forwards to check that it moves freely 
and is securely hinged to the clutch cover.

Place the chain saw on firm ground and start it. Make sure 
the chain does not touch the ground or any other object. See 
the instructions under the heading Start and stop.

Grasp the chain saw firmly, wrapping your fingers and 
thumbs around the handles.

Apply full throttle and activate the chain brake by tilting your 
left wrist forward onto the front hand guard. Do not let go of 
the front handle. The chain should stop immediately.

•

Make sure the throttle control is locked at the idle setting 
when the throttle lockout is released.

•

Press the throttle lockout and make sure it returns to its 
original position when you release it.

•

Check that the throttle control and throttle lockout move 
freely and that the return springs work properly.

•

Start the chain saw and apply full throttle. Release the 
throttle control and check that the chain stops and 
remains stationary. If the chain rotates when the throttle 
control is in the idle position you should check the 
carburetor idle adjustment.

Check that the chain catcher is not damaged and is firmly 
attached to the body of the chain saw. Replace it if 
necessary with an aluminium chain catcher (is available as 
spare part).