Motorola MVME2400 用户手册
1-1
1
1
Preparing and Installing the
MVME2400-Series Module
Introduction
This chapter provides a brief description of the MVME2400-Series VME
Processor Module, and instructions for preparing and installing the
hardware.
Processor Module, and instructions for preparing and installing the
hardware.
In this manual, the name MVME240x refers to all models of the
MVME2400-series boards, unless otherwise specified.
MVME2400-series boards, unless otherwise specified.
MVME240x Description
The MVME2400-series VME processor module is a PCI Mezzanine Card
(PMC) carrier board. It is based on the PowerPC™ 750 microprocessor,
MPC750.
(PMC) carrier board. It is based on the PowerPC™ 750 microprocessor,
MPC750.
Two front panel cutouts provide access to PMC I/O. One double-width or
two single-width PMCs can be installed directly on the MVME240x.
Optionally, one or two PMCspan PCI expansion mezzanine modules can
be added to provide the capability of up to four additional PMC modules.
two single-width PMCs can be installed directly on the MVME240x.
Optionally, one or two PMCspan PCI expansion mezzanine modules can
be added to provide the capability of up to four additional PMC modules.
Two RJ45 connectors on the front panel provide the interface to
10/100Base-T Ethernet, and to a debug serial port.
10/100Base-T Ethernet, and to a debug serial port.
The following list is of equipment that is appropriate for use in an
MVME240x system:
MVME240x system:
❏
PMCspan PCI expansion mezzanine module
❏
Peripheral Component Interconnect (PCI) Mezzanine Cards
(PMC)s
(PMC)s
❏
VMEsystem enclosure
❏
System console terminal
❏
Disk drives (and/or other I/O) and controllers
❏
Operating system (and/or application software)