Samsung RM255BABB 用户手册

1. Disconnect the power cord of the refrigerator.
2.  Remove  the fixing screws (8) of compressor 

cover.

3.  Slide up and take off the compressor cover to 

see the machine  compartment.

4. Unscrew the electric box cover in the rear of

refrigerator with the crossed-head
screwdriver.(2 screws)

5. Separate the electric box by lifting up to see

pcb-main-assy.

The sub-condenser is located in the machine
compartment. Heat is released by the condenser
fan.
1. Desolder the compressor discharge 

the sub-condenser outlet.

2. Take out the sub-condenser.

Desoldering
Point

PCB-MAIN
ASSY

The condenser Fan is located in the middle of

the machine compartment. It cools down the sub-
condenser and the compressor.

1. Disconnect the condenser fan wire.
2. Separate the condenser fan hook attached to

the drain water tray by slightly lifting and
pulling the condenser fan.

3. Take the condenser fan assembly off.

When the solenoids receive a signal from the
micro-processor, they supply water to the water
dispenser or the ice maker.
1. Remove bracket screw (1) on cabinet bottom right sid.
2. Take the solenoid assembly out.
3. Disconnect the water tubes (3).

58

58