Inglis Home Appliances 2225407 用户手册

NOTE: Can racks may be purchased as an Accessory for some 
models.

1. Remove the rack/bin by lifting it and pulling it straight out.

2. Replace the rack/bin by sliding it in above the desired 

support and pushing it down until it stops.

The utility compartment and tray slide from one side to the other 
for more flexible storage. The tray fits on either side of the utility 
compartment or partially underneath it. Try moving it to different 
positions to find the option that works best for you.

1. Insert the front of the utility tray into the slot on the back of 

the shelf rail. Lower the back of the tray into position.

2. Place the front of the utility compartment on top of the shelf 

rail. Lower the back of the compartment onto the ribs on the 
refrigerator door.

3. Adjust the utility compartment by lifting the front slightly and 

sliding it to the desired position. Lower the front to lock it into 
place.

The shelf bottom flips up so you can store taller items in the door 
shelf below. When in the down position, the shelf is strong 
enough to hold up to 10 lbs. (4.5 kg).

Both the refrigerator and freezer sections defrost automatically. 
However, clean both sections about once a month to prevent 
odors from building up. Wipe up spills immediately.

1. Unplug refrigerator or disconnect power.

2. Remove all removable parts from inside, such as shelves, 

crispers, etc.

3. Hand wash, rinse, and dry removable parts and interior 

surfaces thoroughly. Use a clean sponge or soft cloth and a 
mild detergent in warm water. 

■

Do not use abrasive or harsh cleaners such as window 
sprays, scouring cleansers, flammable fluids, cleaning 
waxes, concentrated detergents, bleaches or cleansers 
containing petroleum products on plastic parts, interior 
and door liners or gaskets. Do not use paper towels, 
scouring pads, or other harsh cleaning tools. These can 
scratch or damage materials.

■

To help remove odors, you can wash interior walls with a 
mixture of warm water and baking soda (2 tbs. to 1 qt. 
[26 g to .95 L] of water).

4. Wash stainless steel and painted metal exteriors with a clean 

sponge or soft cloth and a mild detergent in warm water. Do 
not use abrasive or harsh cleaners. Dry thoroughly with a soft 
cloth. For additional protection against damage to painted 
metal exteriors, apply appliance wax (or auto paste wax) with 
a clean, soft cloth. Do not wax plastic parts. 

NOTE: To keep your Stainless Steel refrigerator looking like 
new and to remove minor scuffs or marks, it is suggested that 
you use the manufacturer’s approved Stainless Steel Cleaner 
& Polish. 

IMPORTANT: This cleaner is for Stainless Steel parts only!

Do not allow the Stainless Steel Cleaner & Polish to come into 
contact with any plastic parts such as the trim pieces, 
dispenser covers or door gaskets. If accidental contact does 
occur, clean plastic part with a sponge and mild detergent in 
warm water. Dry thoroughly with a soft cloth. To order the 
cleaner, see the “Accessories” section.