True Manufacturing Company TCGR-50-CD 用户手册

• Phillips screwdriver
•  Stiff bristle brush
• Adjustable wrench
• Vacuum

A.  Disconnect power to unit.
B.  Take off rear lower grill assembly by removing 

two (2) bottom screws.

    If necessary, loosen screws holding the top 

pivot pins.  Swing grill up and remove frame 
hooks from pivot pins at top of louver.

C.  Remove bolts anchoring compressor assembly 

to frame rails and carefully slide out (tube 
connections are flexible).

D.  Clean off accumulated dirt from condensing 

coil with a stiff bristle brush.

E.  After brushing condenser coil vacuum dirt 

from coil and interior floor.

F.   Carefully slide compressor assembly back into 

position and replace bolts.

G.  Connect unit to power and check to see if 

condenser is running.

H.  Reinstall louver assembly onto unit, tighten all 

screws.