Multi-Tech Systems MTD-H5 用户手册
GETTING STARTED
2.
Suspend ModemQuery.
3.
Wait for Steps 1-2 to complete.
4.
Verify that the modem has disconnected.
5.
Issue AT#SHDN and wait for OK. Wait 30 seconds after the OK before unplugging or removing power.
6.
Disconnect the device from the USB port.
Device Phone Number
Every device has a unique phone number. Your service provider supplies a phone number when you activate your
account, or if your device has a SIM card, the phone number may be on it. Wireless service provider
implementation may vary. Consult with your service provider to get the phone number for your device.
account, or if your device has a SIM card, the phone number may be on it. Wireless service provider
implementation may vary. Consult with your service provider to get the phone number for your device.
Using Connection Manager to Install Drivers and Connect to the
Carrier Network
Carrier Network
Connection Manager is software that installs device drivers and connects your device to your carrier's network.
Note:
MTD-H5 models use SIM based activation. If you do not have a SIM card, contact your carrier.
■
Windows XP, Vista, 7, 8 and 2008, both 32-bit and 64-bit versions
■
Windows Server 2012
■
Windows 2003 Server 32-bit version
To download and install the Connection Manager:
1.
Go to www.multitech.com/connectionmanager.go.
2.
Click Connection Manger.
3.
Open or unzip the Connection Manager file and run the installer (.msi file).
4.
When prompted, plug the device into a USB port.
5.
Wait for drivers to install, then click Next.
6.
Open Connection Manager.
7.
To set the application to load during Windows startup and automatically connect to the internet:
a.
Click Settings and check the boxes for Run application at Windows startup and Connect to the
Internet Automatically.
Internet Automatically.
b.
Click Apply.
8.
To allow Connection Manager to re-connect when a connection is lost:
a.
Click Connection and check Enable keep-alive.
b.
Enter an address to ping in the Host to ping box (for example, 8.8.8.8 which is www.google.com).
9.
Enter Dial number and APN if different from the default.
10.
Click Apply to save settings.
11.
Click Main, then click Connect to start your connection.
12.
Browse to a website to confirm the device has Internet access.
If the keep-alive fails, Connection Manager automatically reconnects. When you start the computer, Connection
Manager launches and establishes a connection.
Manager launches and establishes a connection.
14
QuickCarrier
TM
USB-D MTD-H5 User Guide