Husqvarna 966067201 用户手册

SToRAGE

29

At the end of the season, the machine should be 
readied for storage (or if it will not be in use for longer 
than 30 days). Fuel allowed to stand for long periods 
of time (30 days or more) can leave sticky residues 
that can plug the carburetor and disrupt engine 
function.
Fuel stabilizers are an acceptable option to reducing 
sticky residues during storage. If alkylate gasoline 
(Aspen) is used, stabilizers are unnecessary because 
this fuel is stable. However, you should avoid 
switching between regular and alkylate gasoline 
as sensitive rubber components can harden. Add 
stabilizer to the fuel in the tank or in the storage 
container. Always use the mixing ratios specified by 
the manufacturer of the stabilizer. Run the engine for 
at least 10 minutes after adding the stabilizer so that 
it reaches the carburetor. Do not empty the fuel tank 
and the carburetor if you have added stabilizer.

Close the fuel valve.

5. 

Remove the spark plug and pour about a 

6. 

tablespoon of engine oil in the cylinder. Turn over 
the engine so that the oil is evenly distributed and 
then refit the spark plug.
Lubricate all grease nipples, joints and shafts as 

7. 

described in the chapter “Lubrication/Lubrication 
Schedule”.
Store the machine in a clean, dry place and cover 

8. 

for extra protection.

To ready the machine for storage, follow these steps:

Clean the machine carefully, particularly the 

1. 

chassis and working equipment. Mend damage to 
the paint to prevent rust.
Inspect the machine for worn or damaged parts 

2. 

and tighten any nuts or bolts that may have 
become loose.
Change the engine oil; dispose of properly.

3. 

open the fuel valve. Empty the fuel tank and the 

4. 

carburetor.

When ordering spare parts, please specify the 
 purchase year, model, type, and serial number.
Always use genuine Husqvarna spare parts.
An annual check-up at an authorized service 
workshop is a good way to ensure that your machine 
performs its best the following season.