Roland 5100001499-01 用户手册

 

Before You Start Playing

 

You can connect a commercially available CD drive and play 
back audio CDs and CD-ROMs containing saved SMF music 
files. 

 

You can also play songs on VIMA CD-ROMs (VIMA TUNES) 
sold by Roland.

 

• The ATELIER is capable of playing back only commercial 

CDs that conform the official standards-those that carry 
the “COMPACT disc DIGITAL AUDIO” logo. 

• The usability and sound quality of audio discs that 

incorporate copyright protection technology and other 
non-standard CDs cannot be guaranteed.

• For more detailed information on audio discs featuring 

copyright protection technology and other non-standard 
CDs, please consult the disc vendor.

• You cannot save songs to CDs, and you cannot delete 

songs recorded to CDs. Furthermore, you cannot format 
CDs.

 

The ATELIER does not support CD drives that are powered 
by the USB bus. If you use a USB-bus-powered CD drive, 
you must use the power supply included with the CD drive 
so that the drive will operate under its own power.

 

For information on how to perform the following CD-drive 
operations, refer to the owner’s manual for the drive. 

• Switching the power on and off
• Inserting and ejecting a CD

A list of the CD drives that have been tested and found to be 
compatible is available on the Roland website.

http://www.roland.com/

 

If you feel that the ATELIER has become unstable, for example 
after moving it to another location, turn the adjuster located on 
the bottom of the stand’s legs as shown in the following.

 

When turning the adjuster, be careful not to pinch your 
hand.

 

• Rotate the adjustor to lower it so that it is in firm contact 

with the floor. Make adjustments so that there is no gap 
between the adjuster and the floor. In particular, when 
placing the ATELIER on carpet, turn the adjuster so that it 
is firmly in contact with the floor.

AT-75_e.book 20 ページ ２００８年８月２１日　木曜日　午前１０時９分