Roland 5100001499-01 用户手册

 

Using the Rhythm Performance

 

To cancel the procedure, press the [Display/Exit] button.

 

While the Rhythm is being copied into internal memory, the following
screen will be displayed.

If you select a number in which a Rhythm is already saved, a screen like the 
following appears.

If you want to delete the previously saved Rhythm and overwrite it with the 
Rhythm you’re newly saving, Press the [Rec] button.
If you don’t want to delete the previously saved Rhythm, press the [Reset] 
button, then select a number at which no Rhythm has been saved, and copy 
the Rhythm to that number.

To return to the basic screen, press the [Utility] button.

 

You can copy Rhythms from User memory to USB memory.
To do so, press the [Media] button in step 7 (above) to choose “User.” In this 
state, you’ll be copying Rhythms from User memory to USB memory.

The rest of the procedure is the same as when copying Rhythms from USB 
memory to User memory.

Never remove the USB memory 
or turn off the power while the 
Rhythm data is being copied 
from USB memory into the 
ATELIER. If you do so, the 
Rhythm data will not be loaded 
into the ATELIER, and 
malfunctions could result. After 
returning the Rhythm stored in 
the User memory to the factory 
settings (p. 114), copy the 
Rhythm from USB memory once 
more.

You can return only the User 
memory to the factory settings. 
Refer to “Restoring the User 
Memory to the Original Factory 
Settings (User Memory Reset)” 
(p. 114).

AT-75_e.book 54 ページ ２００８年８月２１日　木曜日　午前１０時９分