Roland 5100001499-01 用户手册

 

Using the Registration Buttons

 

Using the Registration Buttons

 

To cancel the procedure, press the [Display/Exit] button.

 

If you select a number in which a Registration is already saved, a screen like 
the following appears.

If you want to delete the previously saved Registration and overwrite it with 
the Registration you’re newly saving, Press the [Rec] button.
If you don’t want to delete the previously saved Registration, press the [Reset] 
Button, then select a number at which no Registration has been saved, and 
copy the Registration to that number.

To return to the basic screen, press the [Utility] button.

 

You can copy Registration from User memory to USB memory.
To do so, press the [Media] button in step 7 to choose “User.” In this state, 
you’ll be copying Registration from User memory to USB memory.

The rest of the procedure is the same as when copying Registration from USB 
memory to User memory.

Never remove the USB memory 
or turn off the power while the 
Registration data is being 
copied from USB memory into 
the ATELIER. If you do so, the 
Registration data will not be 
loaded into the ATELIER, and 
malfunctions could result. After 
returning the Registration 
stored in the User memory to 
the factory settings (p. 114), 
reload the Registration from 
USB memory.

You can return only the User 
memory to the factory settings. 
Refer to “Restoring the User 
Memory to the Original Factory 
Settings (User Memory 
Reset)”(p. 114).

AT-75_e.book 67 ページ ２００８年８月２１日　木曜日　午前１０時９分