Husqvarna 323R 用户手册

12 – 

English

1151416-95   Rev. 1  2008-12-23

•

Remove the screw at the rear of the throttle handle.

•

Slide the throttle handle onto the right side of the 
handlebar, (see diagram).

•

Align the screw hole in the throttle handle with the hole in 
the handlebar.

•

Refit the screw in the hole in the rear of the throttle handle.

•

Screw the screw through the handle and handlebar. 
Tighten it.

•

Fit the mounting components as shown.

•

The handle mounting must be fitted between the arrows 
on the shaft.

•

Loosely tighten the four screws.

•

Put on the harness and hang the machine from the 
support hook. Now make a final adjustment so that the 
machine is in a comfortable working position when it 
hangs from the harness. Tighten the screws. 

•

Remove the screw at the rear of the throttle handle.

•

Slide the throttle handle onto the right side of the 
handlebar, (see diagram).

•

Align the screw hole in the throttle handle with the hole in 
the handlebar.

•

Refit the screw in the hole in the rear of the throttle handle.

•

Screw the screw through the handle and handlebar. 
Tighten it.

•

Unscrew the knob from the handlebar mounting.

•

Position the handlebar as shown. Fit the mounting 
components and tighten the knob lightly.

•

Put on the harness and hang the machine from the 
support hook. Now make a final adjustment so that the 
machine is in a comfortable working position when it 
hangs from the harness. Tighten the knob.