Crosley 2209920 用户手册

■

To ensure proper ventilation for your refrigerator, allow for a 
.5 in. (1.25 cm) space on each side.

■

Allow 3 in. (7.5 cm) of space between overhead cabinets and 
refrigerator top.

■

Allow at least 1 in. (2.5 cm) between back of cabinet and the 
wall.

■

If your refrigerator has an ice maker, make sure you leave 
some extra space at the back for the water line connections.

■

If you are installing your refrigerator next to a fixed wall, leave 
2 in. (5.08 cm) minimum on the hinge side (depending on your 
model) to allow for the door to swing open.

■

Level the refrigerator (See “Door Closing and Alignment”).

NOTE: Do not install the refrigerator near an oven, radiator, or 
other heat source, nor in a location where the temperature will fall 
below 40° F (5° C).

Before you move your refrigerator into its final location, it is 
important to make sure you have the proper electrical 
connection:

A 115 Volt, 60 Hz., AC only 15 or 20 ampere fused, grounded 
electrical supply is required. It is recommended that a separate 
circuit serving only your refrigerator be provided. Use an outlet 
that cannot be turned off by a switch. Do not use an extension 
cord.

NOTE: Before performing any type of installation, cleaning, or 
removing a light bulb, turn the control, (Thermostat, Refrigerator 
or Freezer Control depending on the model) to OFF and then 
disconnect the refrigerator from the electrical source. When you 
are finished, reconnect the refrigerator to the electrical source 
and reset the control (Thermostat, Refrigerator or Freezer Control 
depending on the model) to the desired setting.