Dacor PF36BNNF 用户手册
2
l
oCaTion
r
equiremenTs
Your Dacor refrigerator can be recessed in an opening between
cabinets or installed at the end of a cabinet run using a side panel
to enclose the refrigerator.
cabinets or installed at the end of a cabinet run using a side panel
to enclose the refrigerator.
IMPORTANT:
Observe all governing codes and ordinances.
•
To ensure proper ventilation for your refrigerator, allow for a
•
1/2” (1.25 mm) space at the top and behind the refrigerator.
Do not install the refrigerator in a location where the
•
temperature will fall below 55°F (13°C).
Allow a minimum of 2 1/2” (64 mm) space between the side
•
of the refrigerator and an oven or range.
The floor must be able to support the refrigerator’s weight of
•
more than 600 lbs (272 kg), the door panels and the contents
of the refrigerator.
of the refrigerator.
The area to the left and the right of the appliance must
•
permit both doors to open to a minimum of 90°. Allow space
between the side of the refrigerator doors and a corner wall
for the handle and/or custom door panels.
between the side of the refrigerator doors and a corner wall
for the handle and/or custom door panels.
P
roDuCT
D
imensions
The depth from the front of the door (w/o door handles) to the
•
back of the refrigerator chassis is 27” (686 mm).
The depth of the cabinet less the door is 24 1/4” (616 mm).
•
The power cord is 60” (1524 mm) long.
•
D
esign
s
PeCifiCaTions
i
nsTallaTion
s
PeCifiCaTions
T
ools
anD
P
arTs
Make sure that you have the necessary tools and materials
available for a proper installation:
available for a proper installation:
Phillips screwdriver set
•
Slotted screwdriver set
•
Copper tubing for the water line. Provide sufficient length to
•
allow for a minimum of a 24” (610 mm) diameter service loop.
Compression nut and compression sleeve to connect to the
•
water supply valve. A compression nut and sleeve are include
with the unit to connect the refrigerator side of the line.
with the unit to connect the refrigerator side of the line.
Copper tubing cutter
•
Level - 2’ (.6 m) and 4’ (1.2 m) recommended
•
Appliance dolly able to support 700 lbs (317 kg) and
•
adequate manpower to handle the weight of the appliance
Nut driver set or socket set
•
Crescent wrench
•
Cordless drill and assorted drill bits
•
Plywood or cardboard to protect finished flooring
•
Appropriate materials to cover and protect the home and its
•
furnishings during installation
WARNING
Explosion Hazard
Keep flammable materials and vapors, such as
gasoline, away from refrigerator.
Failure to do so can result in death, explosion, or fire.
Failure to do so can result in death, explosion, or fire.
The height
•
from the top of the refrigerator to the floor with the
leveling legs in the down position is 70 1/8” (1781 mm).
The height from the top of the refrigerator to the floor with the
•
leveling legs in the fully extended position is 71 1/4” (1810
mm) at the front of the unit. Add 2 1/2” (635 mm) for the
optional top trim kit.
mm) at the front of the unit. Add 2 1/2” (635 mm) for the
optional top trim kit.
The refrigerator width from edge to edge is 35 5/8” (905 mm).
•