Danby DPC6012BLS 用户手册

• Not plugged in

• The appliance is turned off

• No power to unit

• Check the temperature control setting

• External environment may require a 

cooler setting.

• The door is opened too often 

• The door is not closed completely

• The door gasket does not seal properly

• The room temperature is hotter than

normal.

• A large amount of beverage has been

added to the Party Center 

• The door is opened too often

• The door is not closed completely

• The temperature control is not set 

correctly 

• The door gasket does not seal properly

• Not plugged in

• No power

• The light button is “OFF”

• Ensure that the Party Center is level.

• The rattling noise may come from the

flow of the refrigerant, which is normal.

As each cycle ends, you may hear 

gurgling sounds caused by the flow of

refrigerant in your Party Center.

• Contraction and expansion of the inside

walls may cause popping and crackling

noises.

• The Party Center is not level

• Plug in the unit. 

• Press the ON button.

• Reset circuit breaker; check

fuses

• Adjust setting as needed

• Adjust setting as needed

• Limit open door duration

• Close door securely

• Ensure the gasket is clean

• This is normal

• Limit amount of warm 

beverage introduced at one time

• Limit amout of door openings

• Close door securely

• Adjust setting as needed

• Ensure the gasket is clean

• Plug in the unit

• Reset circuit breaker; check

fuses

• Switch light button to “ON”

• Level the Party Center; see pg

2 “Installation Instructions”

• This is normal

• This is normal

• Level the party center

Occasionally, a problem is minor and a service call may not be necessary- use this troubleshooting guide for a possible
solution.  If the unit continues to operate improperly, call an authorized service depot or Danby’s Toll Free Number 
1-800-263-2629 for assistance.

8