GE ZIRS36N LH 用户手册

3

Design Information

 

 True Flush Installation

In a flush installation,

the refrigerator door

   will align evenly with the front

face of adjacent cabinet doors.
The refrigerator blends into the

surrounding cabinetry.

  

These refrigerators

can also be installed

semi-flush into an enclosure

using the minimum cutout

width. The case trim creates a

frame around the opening.

Monogram built-in refrigerators and freezers can be
installed flush with typical 24-3/4" deep cabinetry.

When installed semi-flush, the case trim will conceal
slight gaps around the enclosure. The refrigerator will
project forward approximately 3/4" beyond the front
face of surrounding cabinetry.

• To achieve a flush fit, the finished cutout width must be

at least 36" wide.

• In a semi-flush installation, the finished cutout must be

35-1/2".

• The electrical and water locations must be located

as shown for either type of installation.

*36" for a flush installation.

35-1/2" Min. for a semi-flush installation.

NOTE: Additional cutout width may be required when side
panels are used. Add side panel thickness to the finished
cutout to calculate rough-in width. See installation examples
on the following page.

Side Panel Requirements:
• Side panels are not required whenever the

refrigerator or freezer is installed into an enclosure
or between pantry and oven cabinets.

• Side panels are required whenever the sides of the

product are exposed.

• Side panel sizes vary depending on the type of

installation being made.

To accomplish an attractive installation, you must:
1. Determine the need for side panels.
2. Determine side panel thickness.
3. Order matching side panels from the cabinet

  manufacturer. Be sure to provide the exact dimensions.

0"

3/4"

*Shipped at 84" installation height.

Can be adjusted to 83-1/2"
or 84-1/2" with grille panel kits.

75" From Floor

to Bottom

of Electrical 

Area

84 1/2" max

83 1/2" min

Finished
Opening

*Finished Width

Electrical 
Area

5"

5"

3 1/2"

24 3/4" Total
Depth

Water Supply

3 1/2"

Wall View

2 1/2"

5"

6"

36" Frame to Frame

84"*

26-3/4" 
Including 
Tubular 
Handles

35" 
Case 
Width

24-3/4" 
Case 
Depth