GE 49-60637 数据表

14

The icemaker will produce seven cubes 

per cycle—approximately 100–130 cubes 

in a 24-hour period, depending on freezer

compartment temperature, room temperature,

number of  door openings 

and other use conditions.
If  the refrigerator is operated before the water

connection is made to the icemaker, set the

power switch in the OFF position.
When the refrigerator has been connected to

the water supply, set the power switch to the ON

position.
The icemaker will fill with water when it 

cools to 15°F (–10°C). A newly installed

refrigerator may take 12 to 24 hours to begin

making ice cubes.
You will hear a buzzing sound each time 

the icemaker fills with water.
Throw away the first few batches of  ice to allow

the water line to clear.
Be sure nothing interferes with the sweep 

of  the feeler arm.
When the bin fills to the level of  the feeler arm,

the icemaker will stop producing 

ice. It is normal for several cubes to be joined

together.
If  ice is not used frequently, old ice cubes will

become cloudy, taste stale and shrink. 



Dispenser models have a tilt-out ice bin. The

bin can be tilted out as shown in the

illustrations, and it will hold itself  up while

you take ice out or turn the icemaker power

switch on and off. Be sure to put the bin back

in place before closing the door.



To restore your ice level from an empty

bucket stage, the following steps are

recommended:

12 hours after the first batch of  ice 

has fallen into the bin, dispense 

3 to 4 cubes.
After an additional 6 hours, dispense 

3 to 4 cubes again.

These steps will restore your ice level 

in the shortest amount of  time.

Set the power switch to the OFF position before
removing the bin.

be sure to press it

firmly into place. If  it does not go all the way
back, remove it and rotate the drive mechanism
1/4 turn. Then push the bin back again.

Icemaker

Feeler Arm

Power
Switch

Rotate

Drive
Mechanism