GE TNX22BACBB 用户手册

8' Ceiling

13" to 14"
Cabinet

12" 
Soffit

70-1/4"*

36-1/8"

24-1/2"

An enclosure is required to match up to the trim, see Typical Installation. To obtain the 
most integrated look, the cabinet or soffit above the refrigerator should extend out to the
same depth as the side panels. The refrigerator opening must have minimum dimensions 
of 70-1/4" high x 36-1/8" wide x 24-1/2" deep as shown at right. If there is an overhead 
cabinet, allow 1" for cabinet door clearance with the top trim piece so the cabinet doors 
can be opened without hitting the top trim. If 1/2" side panels are used, then side trim 
and panel will be even. If 3/4" side panels are used, then some of the side panel will 
extend beyond the trim and must be finished.

*The rough-in dimension of 70-1/4" is minimum and is 
measured from the finished floor to top of opening (or the
underside of the overhead cabinets). 
For Models with Trim Kit: If frameless style cabinets are planned
for above the  refrigerator, you may need to consider adding a
maximum of 1/4" (70-1/2") to height of opening to allow addi-
tional clearance between cabinet doors and top of refrigerator
trim when cabinet doors are in open position.

Case

Overhead
Cabinet

Top
Trim

Cabinet
Door

1"

Magnetic
Tape

3/4" Cabinet
Side Panel

1/2" Cabinet
Side Panel

Refrigerator
Case

Side Trim

Side trim must be installed
flush with the gasket contact
surface on the case.

Door Gasket

C

US

®

Manufacturer Certified to

Total volume and shelf
area are calculated by the
Association of Home
Appliance Manufacturers’
standards.

Listed by
Underwriters
Laboratories

For answers to your Monogram,

®

GE Profile Performance Series,

™

GE Profile

™

or GE appliance questions, call 

GE Answer Center

®

service, 800.626.2000.