GE ZICP720 用户手册
16
Installation Instructions
CHECK AND CORRECT DOOR ALIGNMENT (cont.)
13
1. Open the grille panel.
2. Remove 4 screws on the hinge plate.
3. Use pliers to remove door stop pin.
2. Remove 4 screws on the hinge plate.
3. Use pliers to remove door stop pin.
4. Lift door off bottom hinge pin. The door must be held
in place while spacers are being exchanged.
5. Remove the original plastic spacer.
6. Place the selected spacer over the hinge.
7. Reverse all steps to replace the door.
6. Place the selected spacer over the hinge.
7. Reverse all steps to replace the door.
Remove
Pin
Remove
4 Screws
Lift off and replace
plastic spacer