GE ZICP720 用户手册
TOOLS REQUIRED
• Tinsnips to cut banding
• Stepladder
• Bucket
• Level
• Appliance dolly
• Tubing cutter
• 7/16
• Stepladder
• Bucket
• Level
• Appliance dolly
• Tubing cutter
• 7/16
″ open-end wrench
• #2 Phillips screwdriver
• Drill and appropriate bits
• 5/16
• Drill and appropriate bits
• 5/16
″, 7/16″ socket
• Safety glasses
• 1-1/4
• 1-1/4
″ and 1/2″ open-ended wrench
• Pliers
• 1/4
• 1/4
″ ratchet or 1/4″ angled wrench
• Tape measure
HARDWARE SUPPLIED
• Water filter bypass plug
• Anti-Tip brackets
• 1/4
• Anti-Tip brackets
• 1/4
″ nut and ferrule
TRIM SUPPLIED
A. Top trim
B. Left inside case trim
C. Right inside case trim
D. Center U-shape trim
E. Grille base wrap
F. Grille panel
G. Toekick
H. Foam spacer pads
I. Phillips screws (34)
J. Package of 12 plastic spacers
K. Flat metal bracket
L. 2 Large screws (for metal bracket)
M. 2 Corner trim brackets
B. Left inside case trim
C. Right inside case trim
D. Center U-shape trim
E. Grille base wrap
F. Grille panel
G. Toekick
H. Foam spacer pads
I. Phillips screws (34)
J. Package of 12 plastic spacers
K. Flat metal bracket
L. 2 Large screws (for metal bracket)
M. 2 Corner trim brackets
MATERIALS REQUIRED
• 71
″ long 2x4 for Anti-Tip support
• 1/4
″ copper water line tubing or two GE
SmartConnect
™
Refrigerator Tubing kits
• Two water shut-off valves
• Screws to secure refrigerator to cabinetry
• Stick-on hook and loop fastener strips for 1/4
• Screws to secure refrigerator to cabinetry
• Stick-on hook and loop fastener strips for 1/4
″
side panels
FLOORING
For proper installation, this refrigerator must be
placed on a level surface of hard material that is at
the same height as the rest of the flooring. This
surface should be strong enough to support a fully
loaded refrigerator, or approximately 2,400 lbs.
NOTE: Protect the finish of the flooring. Cut a large
section of the cardboard carton and place under the
refrigerator where you are working.
placed on a level surface of hard material that is at
the same height as the rest of the flooring. This
surface should be strong enough to support a fully
loaded refrigerator, or approximately 2,400 lbs.
NOTE: Protect the finish of the flooring. Cut a large
section of the cardboard carton and place under the
refrigerator where you are working.
GROUNDING THE REFRIGERATOR
IMPORTANT—(Please read carefully)
FOR PERSONAL SAFETY, THIS APPLIANCE MUST BE
PROPERLY GROUNDED.
PROPERLY GROUNDED.
The power cord of this appliance is equipped with
a 3-prong (grounding) plug which mates with a
standard three-prong (grounding) wall receptacle
to minimize the possibility of electric shock hazard
from this appliance.
a 3-prong (grounding) plug which mates with a
standard three-prong (grounding) wall receptacle
to minimize the possibility of electric shock hazard
from this appliance.
Have the wall outlet and circuit checked by a
qualified electrician to make sure the outlet is
properly grounded.
qualified electrician to make sure the outlet is
properly grounded.
Where a standard 2-prong wall outlet is encountered,
it is your personal responsibility and obligation to
have it replaced with a properly grounded 3-prong
wall outlet.
it is your personal responsibility and obligation to
have it replaced with a properly grounded 3-prong
wall outlet.
DO NOT, UNDER ANY
CIRCUMSTANCES, CUT
OR REMOVE THE THIRD
(GROUND) PRONG FROM
THE POWER CORD.
CIRCUMSTANCES, CUT
OR REMOVE THE THIRD
(GROUND) PRONG FROM
THE POWER CORD.
DO NOT USE AN ADAPTER PLUG TO CONNECT THE
REFRIGERATOR TO A 2-PRONG OUTLET.
REFRIGERATOR TO A 2-PRONG OUTLET.
DO NOT USE AN EXTENSION CORD WITH THIS
APPLIANCE.
APPLIANCE.
6
Installation Instructions
A
B
C
D
E
F
G
K
I
J
H
M
L