GE TPX24SPBBS 用户手册

An enclosure is required to match up to the
trim, see Typical Installation. To obtain the most
integrated look, the cabinet or soffit above the
refrigerator should extend out to the same
depth as the side panels. The refrigerator 
opening must have minimum dimensions of 
70-1/4" high x 36-1/8" wide x 24-1/4"* deep as
shown at right. If there is an overhead cabinet,
allow 1" for cabinet door clearance with the top
trim piece so the cabinet doors can be opened
without hitting the top trim. If 1/2" side panels
are used, then side trim and panel will be even.
If 3/4" side panels are used, then some of the
side panel will extend beyond the trim and
must be finished.

70-1/4"*

36-1/8"

24-1/2"*

1/2" minimum

25"
Counter
Top

Electrical

Water

Trim

3/4" Airspace
(1/2" Gap + 1/4"
Wall Plates)

24-1/2"* Side panels

net

*24-1/4" depth applies only to the refrigerator opening, 

not the actual cabinet depth.

Case

Overhead
Cabinet

Top
Trim

Cab
Doo

1"

Magnetic
Tape

3/4" Cabinet
Side Panel

1/2" Cabinet
Side Panel

Refrigerator
Case

Side Trim

Side trim must be installed
flush with the gasket contact
surface on the case.

Door Gasket

Shaded areas represent front surfaces
of side panels and overhead cabinet or
soffit that contacts trim.