GE 200D8074P043 数据表

12

The refrigerator doors may feel different

than the ones you are used to. The special

door opening/closing feature makes sure the

doors close all the way and are securely

sealed.

When opening and closing the door you will

notice a stop position. If  the door is opened

past this stop point, the door will remain

open to allow you to load and unload food

more easily. When the door 

is only partially open, it will automatically

close.

The resistance you feel at the stop 

position will be reduced as the door 

is loaded with food.

When the door is only partially open,
it will automatically close.

Beyond this stop the door will 
stay open.

If  doors are uneven, adjust the refrigerator

door. 

Using a 7/16” socket wrench, turn the

door adjusting screw to the right to raise

the door; to the left, to lower it. (A nylon

plug, imbedded in the threads of  the

pin, prevents the pin from turning

unless a wrench is used.) 

After one or two turns of  the wrench,

open and close the refrigerator door

and check the alignment at the top of

the doors.

Before moving the refrigerator, you will need

to screw up the support leg. Once the unit is

relocated, you will need to screw down the

support leg again.

Screw down the support
leg until it touches the
floor. This will prevent
door misalignment.

7/16” Wrench

Raise