GE GTS12BBPLCC 用户手册
Preparing for Vacation
For long vacations or absences, remove
food and unplug the refrigerator. Move the
control to the OFF position, and clean the
interior with a baking soda solution of one
tablespoon (15 ml) of baking soda to one
quart (1 liter) of water. Leave the doors open.
food and unplug the refrigerator. Move the
control to the OFF position, and clean the
interior with a baking soda solution of one
tablespoon (15 ml) of baking soda to one
quart (1 liter) of water. Leave the doors open.
Preparing to Move
Secure all loose items such as shelves and
drawers by taping them securely in place
to prevent damage.
drawers by taping them securely in place
to prevent damage.
Be sure the refrigerator stays in an upright
position during moving.
position during moving.
Consumer
S
uppor
t
Tr
oubleshooting
Tips
Operating
Instructions
Safety
Instructions
Installation
Instructions
7
ge.com
Replacing the Light Bulb
Moving the control to OFF does not remove
power to the light circuit.
power to the light circuit.
The bulb is located behind the shield next
to the control.
to the control.
Unplug the refrigerator.
Remove the screw.
Push in near the top of the shield and
rotate down and out.
rotate down and out.
Replace the bulb with an appliance
bulb of the same or lower wattage
(40 Watt maximum).
bulb of the same or lower wattage
(40 Watt maximum).
Insert the tabs at the bottom of the
light shield with the slots in the bulb
housing.
light shield with the slots in the bulb
housing.
Rotate the shield up until the tabs at
the top of the shield pop into place in
the bulb housing.
the top of the shield pop into place in
the bulb housing.
Replace the screw.