GE Side-by-Side Stainless Steel Free-Standing Refrigerators 用户手册

25

• Icemaker power switch is in the l (on) position, but the water supply

to the refrigerator has not been connected. Set the power switch
to the O (off) position. Keeping it in the l (on) position will damage
the water valve.

• Old cubes need to be discarded.

• Ice storage bin needs to be emptied and washed.

• Unsealed packages in fresh food and/or freezer compartments may 

be transmitting odor/taste to ice cubes.

• Interior of refrigerator needs cleaning. See Care and Cleaning.

• Water filter clogged. Replace the filter or use the filter bypass plug. 

• Door may have been left open.

• Turn temperature of freezer compartment colder. 

See Temperature Controls.

• Icemaker or water supply turned off. Turn on icemaker or water supply.

• Ice cubes are frozen to the icemaker feeler arm. Remove the cubes.
• Irregular clumps in the storage bin. Break up with fingertip pressure 

and discard remaining clumps. The freezer may be too warm. Adjust
the freezer temperature control colder one step at a time until clumps
do not form.

• The dispenser is LOCKED. Press and hold the CONTROL LOCK pad

for 3 seconds.

• An item is blocking or has fallen into the ice chute inside the top 

door bin of the freezer. Remove any item that might be blocking 
or has fallen into the chute.

• Water dispenser has not been used for a long time. Dispense water 

until all water in the system has been replenished.

• Normal when refrigerator is first installed. Allow 24 hours for the 

refrigerator to completely cool down.

• Water dispenser has not been used for a long time. Dispense water 

until all water in the system has been replenished.

• Water system has been drained. Allow several hours for the 

replenished water supply to chill.

• Water supply line turned off or not connected. See the 

Installation Instructions.

• Water filter clogged. Replace the filter or use the filter bypass plug.

• Air may be trapped in the system. Press the dispenser arm for 

at least 2 minutes.

• The dispenser is LOCKED. Press and hold the CONTROL LOCK pad

for 3 seconds.

• Newly installed filter cartridge. Run water from the dispenser for 

about 3 minutes (about 1

1

⁄

2

gallons).

The Problem Solver