Amana W10237708A 用户手册

 

4. Turn shutoff valve ON.

5. Check for leaks. Tighten any nuts or connections (including 

connections at the valve) that leak.

1. Unplug refrigerator or disconnect power.
2. Remove and discard the black nylon plug from the gray water 

tube on the rear of the refrigerator.

3. Thread the provided nut onto the water valve as shown.

NOTE: Tighten the nut by hand. Then tighten it with a wrench 
two more turns. Do not overtighten.

4. Turn shutoff valve ON.
5. Check for leaks. Tighten any nuts or connections (including 

connections at the valve) that leak.

1. Plug into a grounded 3 prong outlet.
2. Flush the water system. See “Prepare the Water System” or 

“Water and Ice Dispensers.”

NOTE: Allow 24 hours to produce the first batch of ice. Allow 
3 days to completely fill ice container.

For your convenience, your refrigerator controls are preset at the 
factory. When you first install your refrigerator, make sure that the 
controls are still preset. The Refrigerator Control and the Freezer 
Control should both be set to the “mid-settings.”
Style 1: Rotary Controls 

■

Your product will not cool when the REFRIGERATOR Control 
is set to OFF.

■

The Refrigerator Control adjusts the refrigerator compartment 
temperature. The Freezer Control adjusts the freezer 
compartment temperature. Settings to the left of the mid-
setting make the temperature less cold. Settings to the right of 
the mid-setting make the temperature colder.

■

Wait 24 hours before you put food into the refrigerator. If you 
add food before the refrigerator has cooled completely, your 
food may spoil.

NOTE: Adjusting the Refrigerator and Freezer Controls to a higher 
(colder) than recommended setting will not cool the 
compartments any faster.

Give the refrigerator time to cool down completely before adding 
food. It is best to wait 24 hours before you put food into the 
refrigerator. The settings indicated in the previous section should 
be correct for normal household refrigerator usage. The controls 
are set correctly when milk or juice is as cold as you like and when 
ice cream is firm. 
Rotary Controls: Turn the control right (clockwise) to make the 
compartment colder. Turn the control left (counterclockwise) to 
make it less cold. To turn the cooling system off, turn the 
Refrigerator Control counterclockwise until it reaches the OFF 
position.
Slide Controls: Slide the control one setting to the right to make 
the compartment colder. Slide the control one setting to the left to 
make it less cold.