Frigidaire FGEF306TMF 用户手册

15

The TIMER and SELF CLEAN pads control the 

Continuous Bake or 6 Hour Energy Saving features. The 

oven control has a factory preset built-in 6 Hour Energy 

Saving feature that will shut off the oven if the oven 

control is left on for more than 6 hours. The oven can 

be programmed to override this feature for Continuous 

Baking.
To set the control for Continuous Bake or 6 Hour 
Energy Saving features

1.  Press and hold TIMER for 6 seconds.

 

After 6 seconds “6Hr OFF” or “StAY On” will appear 

in the display and the control will beep once.

2. Press 

SELF CLEAN to switch between the 6 Hour 

Energy Saving and continuous bake features. 

Note: “6Hr OFF” in the display indicates the control is set 

for the 6 Hour Energy Saving mode and “StAY On” 

indicates the control is set for the Continuous Bake 

feature.

3. Press 

START to accept the change (display will 

return to time of day) or press CANCEL to reject the 

change.

The BROIL and SELF CLEAN pads control the 

Fahrenheit or Celsius temperature display modes. The 

oven control can be programmed to display temperatures 

in Fahrenheit or Celsius. The oven has been preset at the 

factory to display in Fahrenheit.
To change display from Fahrenheit to Celsius or 
Celsius to Fahrenheit

1.  To tell if the display is set for Fahrenheit or Celsius 

press BROIL and hold it for 6 seconds; “550°” 

will appear and “BROIL” will fl ash in the display 

and a beep will sound. If “FAhrnht” appears, the 

display is set to show temperatures in Fahrenheit. 

If “CELSIUS” appears, the display is set to show 

temperatures in Celsius.

2. Press 

SELF CLEAN to switch between Fahrenheit or 

Celsius display modes. The display will show either 

“FAhrnht” or “CELSIUS”.

3. Press 

START to accept the change or press CANCEL 

to reject the change.

The SET CLOCK pad is used to set the clock. The clock 

may be set for 12 or 24 hour time of day operation. 

The clock has been preset at the factory for the 12 hour 

operation. When the range is fi rst plugged in, or when 

the power supply to the range has been interrupted, the 

timer in the display will fl ash.

To set the clock (example below for 1:30)

1. Press 

SET CLOCK.  “CLO” will appear in the display.

2. Press 

1 3 0 pads to set the time of day to 1:30. 

“CLO” will stay in the display. 

3. Press 

START. “CLO” will disappear and the clock will 

start.

1.  Press and hold SET CLOCK for 6 seconds. “CLO” will 

appear in the display.

2.  CONTINUE holding the pad until “12Hr dAY” or 

“24Hr dAY” appears in the display and the control 

beeps once.

3. Press 

SELF CLEAN to switch between the 12 and 24 

hour time of day display. The display will show either 

“12Hr dAY” or “24Hr dAY”.

4. Press 

START to accept the change or press CANCEL 

to reject the change.

5.  Reset the correct time as described in To set the 

Clock above. Please note that if the 24 hour time 

of day mode was chosen, the clock will now display 

time from 0:00 through 23:59 hours.